How to add detergent to the Mijia Front Load Washer Dryer Pro 12.5kg?
With auto-dispensing, the Mijia Front Load Washer Dryer Pro 12.5kg automatically dispenses detergent during the water intake phase. Programs without a wash phase won't activate detergent dispensing. Pour liquid detergent or fabric softener into the corresponding compartments of the dispenser drawer. Do not fill above the MAX line, and put powder detergent in the drawer.
To add detergent to the Mijia Front Load Washer Dryer Pro 12.5kg, please refer to the following steps:
1. Pull out the dispenser drawer.
2. Pour liquid detergent or fabric softener into the corresponding compartments of the dispenser drawer. Please do not exceed the MAX line.
3. Close the detergent dispenser drawer.
4. If laundry detergent is spilled, wipe it up with a rag as soon as possible.
Note:
1. Do not add powdered detergent into the dispenser drawer.
2. Do not add detergent (powder or liquid) into the fabric softener compartment.
3. Do not open the dispenser drawer when the machine is in operation.
4. When the washer dryer remains unused for extended periods, residual detergent may solidify. Dilute it with water before next use.
5. When using viscous detergents, dilute them with a small amount of water to reduce viscosity before adding to the detergent compartment.
6. If a false low-liquid alert occurs, check whether the detergent has solidified inside the dispenser drawer.
7. Promptly wipe off any detergent spilled on the machine body to prevent corrosive damage to its exterior.
Does it help?
Yes
No