What to do if the connections on the 3-way faucet valve of the Xiaomi Tabletop Dishwasher are mismatched?

If the connections on the 3-way faucet valve are mismatched, please refer to the following methods:
1. You can the faucet with a compatible one or switch to a faucet with a built-in 3-way function;
2. You can purchase a conversion adapter to match with the faucet: use a 24mm inner thread (fine thread) to convert to a 22mm outer thread (fine thread);
3. Use the soap dispenser hole or drill a hole to install a 3-way or multi-way angle valve, installing the under-sink water pipe like that of the sink faucet;
4. Install the inlet hose at the under-sink angle valve;
5. Extend the hose installation method: install an extension hose with the under-sink angle valve, connecting one end to the inlet hose and passing the extension hose through the soap dispenser hole;
6. If the inlet pipe is near the water heater, use the angle valve of the cold water pipe from the water heater to replace it with a 3-way valve, connecting it to the inlet hose of the dishwasher.