Home/Support/FAQ/

How to install a Micro SD card on the Xiaomi Outdoor Camera AW300?

/

How to install a Micro SD card on the Xiaomi Outdoor Camera AW300?

The Xiaomi Outdoor Camera AW300 supports the SD card storage of up to 256GB.
To install a Micro SD card on the camera, please refer to the following steps:
1. Remove the protective cover with a screwdriver to expose the Micro SD card slot and Reset Button;
2. Insert the Micro SD card into the card slot, and please pay attention to the direction of inserting the Micro SD card;
3. After inserting the Micro SD card, please make sure to tighten the protective cover with screws before using it to prevent water ingress.
Note:
1. The PH00 or PH1 screwdrivers are recommended for opening or installing the SD card slot. The SD card slot mounting screw specification is M1.7;
2. It is recommended to use a high-speed Micro SD card with the Class10, U1, and U3 logo. This camera supports a minimum of 16GB and a maximum of 256GB. Above 32GB must be formatted in FAT32 format in the camera storage management to be used;
3. Memory card storage duration (stored video recorded in the highest definition supported by the camera):
Storage capacity2K HD
16GBAbout 36 hours
32GBAbout 3 days
64GBAbout 6 days
128GBAbout 14 days
256GBAbout 24 days