How to use the Xiaomi Smart Scent Diffuser?
To use the Xiaomi Smart Scent Diffuser, please refer to the following instructions:
1. Turing on/off and switching levels: Press the power button to turn on and press and hold the power button for 2 seconds to turn off. After turning it on, press the power button to cycle through level 1, level 2, level 3, and off;
2. Level introduction: The scent diffuser has three levels, level 1, level 2, and level 3, with diffusion intervals of 20 minutes, 15 minutes, and 10 minutes respectively, and a single diffusion duration of 2 seconds. The indicator on the scent diffuser body shows I, II, and III for levels 1 to 3 respectively;
3. Turning the ambient light on/off: Press the ambient light on/off button to turn the ambient light on/off;
4. Resetting the scent diffuser: Press and hold the reset button with a pin for more than 7 seconds. When the ambient light blinks in orange, the scent diffuser has been reset successfully.
Note:
Fully charge the scent diffuser before using it for the first time. Remove the silicone plug from the charging port in the scent diffuser body, plug the charging cable into the charging port and connect it to a power outlet to start charging. Place back the silicone plug once fully charged.
1. Turing on/off and switching levels: Press the power button to turn on and press and hold the power button for 2 seconds to turn off. After turning it on, press the power button to cycle through level 1, level 2, level 3, and off;
2. Level introduction: The scent diffuser has three levels, level 1, level 2, and level 3, with diffusion intervals of 20 minutes, 15 minutes, and 10 minutes respectively, and a single diffusion duration of 2 seconds. The indicator on the scent diffuser body shows I, II, and III for levels 1 to 3 respectively;
3. Turning the ambient light on/off: Press the ambient light on/off button to turn the ambient light on/off;
4. Resetting the scent diffuser: Press and hold the reset button with a pin for more than 7 seconds. When the ambient light blinks in orange, the scent diffuser has been reset successfully.
Note:
Fully charge the scent diffuser before using it for the first time. Remove the silicone plug from the charging port in the scent diffuser body, plug the charging cable into the charging port and connect it to a power outlet to start charging. Place back the silicone plug once fully charged.
Does it help?
Yes
No