What are the steps of mounting the Xiaomi Smart Camera C500 Dual on a wall?
To mount the Xiaomi Smart Camera C500 Dual on a wall, please refer to the following steps:
1. Stick the mounting template sticker in a proper position on the wall. Drill holes in the wall that align with the holes on the sticker, with a diameter of about 6mm and a depth of about 30mm. The diameter of the stand base is approximately 76mm and the hole distance is approximately 3.6cm;
2. Insert the plastic wall plugs into the drilled holes;
3. Align the holes on the wall mount with the drilled holes in the wall. Insert a screw through each wall mount hole, and then screw it into each wall plug with a Phillips head screwdriver;
4. Align the grooves on the bottom of the camera with the raised part on the wall mount. Then hold both positions with "
" on the wall mount and turn the wall mount clockwise until it locks into place;
5. Adjust the shaft of the wall mount until the camera reaches a proper angle. Hold and horizontally turn the camera to adjust the horizontal direction of the fixed lens. Vertically turn the camera along the direction of "
" on the wall mount to adjust the pitching angle of the fixed lens.
Note:
1. The wall must be able to support at least three times the total weight of the camera;
2. The camera must be securely fixed to the ceiling or wall according to the installation instructions to prevent possible injury;
3. After the downward installation, you need to rotate the image 180° in the camera settings in the Mi Home/Xiaomi Home APP;
4. The hole distance between the two installation brackets is 36mm.
1. Stick the mounting template sticker in a proper position on the wall. Drill holes in the wall that align with the holes on the sticker, with a diameter of about 6mm and a depth of about 30mm. The diameter of the stand base is approximately 76mm and the hole distance is approximately 3.6cm;
2. Insert the plastic wall plugs into the drilled holes;
3. Align the holes on the wall mount with the drilled holes in the wall. Insert a screw through each wall mount hole, and then screw it into each wall plug with a Phillips head screwdriver;
4. Align the grooves on the bottom of the camera with the raised part on the wall mount. Then hold both positions with "
" on the wall mount and turn the wall mount clockwise until it locks into place;5. Adjust the shaft of the wall mount until the camera reaches a proper angle. Hold and horizontally turn the camera to adjust the horizontal direction of the fixed lens. Vertically turn the camera along the direction of "
" on the wall mount to adjust the pitching angle of the fixed lens.Note:
1. The wall must be able to support at least three times the total weight of the camera;
2. The camera must be securely fixed to the ceiling or wall according to the installation instructions to prevent possible injury;
3. After the downward installation, you need to rotate the image 180° in the camera settings in the Mi Home/Xiaomi Home APP;
4. The hole distance between the two installation brackets is 36mm.
Does it help?
Yes
No