How to use the Xiaomi Smart Water Dispenser (Hot and Cold)?
To use the dispenser, please refer to the following steps:
1. Installing the drip tray: Align the clips at the bottom of the drip tray with slots in the lower part of the water dispenser, and gently press the drip tray to secure it in place. To remove the drip tray, lift it upward to detach it from the slots, and then move it outward;
2. Filling the water tank: Before using, clean the water tank, fill it with purified water, and install it on the water dispenser;
Note:
1. Do not add hot water or tap water;
2. After filling the water tank for the first time and installing it on the water dispenser, you will hear the sound of water flowing, which is normal.
3. Connecting to power and turning on/off: Remove the dust cover from the water outlet, plug the power plug into a 220V household power supply, and press and hold the on/off button for 2 seconds to turn the water dispenser on/off;
4. Enabling/Disabling cooling: Press the cooling button to enable the cooling function. The cooling indicator will blink during the cooling process and will remain on once cooling is finished. Press the cooling button again to disable the cooling function, and the cooling indicator will go off.
1. Installing the drip tray: Align the clips at the bottom of the drip tray with slots in the lower part of the water dispenser, and gently press the drip tray to secure it in place. To remove the drip tray, lift it upward to detach it from the slots, and then move it outward;
2. Filling the water tank: Before using, clean the water tank, fill it with purified water, and install it on the water dispenser;
Note:
1. Do not add hot water or tap water;
2. After filling the water tank for the first time and installing it on the water dispenser, you will hear the sound of water flowing, which is normal.
3. Connecting to power and turning on/off: Remove the dust cover from the water outlet, plug the power plug into a 220V household power supply, and press and hold the on/off button for 2 seconds to turn the water dispenser on/off;
4. Enabling/Disabling cooling: Press the cooling button to enable the cooling function. The cooling indicator will blink during the cooling process and will remain on once cooling is finished. Press the cooling button again to disable the cooling function, and the cooling indicator will go off.
Does it help?
Yes
No