Ways of swiping card-introduction of smart card selection
The smart card selection function can smartly switch door cards and bus cards according to the card reader device and geographical location, avoiding the need to manually select bus cards or door cards every time you use them. (This function does not support the cards that need to be verified through fingerprints.)
The frequent questions of smart card selection are listed below:
1. Q: Does smart card selection have requirements for the smartphone chips?
A: Smart card selection in the Xiaomi smartphone is realized through low-consumption smart location sensing technology, which is only supported in chips of Qualcomm;
2. Q: What cards does smart card selection support?
A: Bus cards and door cards are supported currently. The cards that need fingerprint verification as Mi Pay are not supported;
3. Q: How many addresses can be set in the door cards of smart card selection?
A: Up to 4;
4. Q: What limitations does smart card selection have to bus cards?
A: You can only select one bus card. If you have set several bus cards, it is recommended to select the one that you use most;
5. Q: Why the card cannot be waken after the usual address has been set?
A: (1). Please check whether the GPS of your smartphone is normal;
(2). Please check whether the NFC of your smartphone is normal;
(3). If the two points above are normal, inaccurate positioning is one of the reasons. Please restart the smartphone and check it;
6. Q: Can smart card selection and default shortcut card be used simultaneously?
A: Not support. These two are different ways of card swiping. They can only be used alternately, not simultaneously;
7. Q: What are the differences between smart card selection and default shortcut card?
A: Smart card selection is to select the card to swipe based on the card reader and geographic location. As long as you set the usual address, the system will smartly switch the default card to swipe based on your current location information and card reader and other conditions.
The default shortcut card is to select one of the bus cards and door cards as the usual card. As long as you set the custom time, the system will call up other cards during the custom time and automatically call up the frequently used card at other times.
One is for selecting cards at fixed times, and the other is for selecting cards at usual addresses. You can set the service according to your needs.
The frequent questions of smart card selection are listed below:
1. Q: Does smart card selection have requirements for the smartphone chips?
A: Smart card selection in the Xiaomi smartphone is realized through low-consumption smart location sensing technology, which is only supported in chips of Qualcomm;
2. Q: What cards does smart card selection support?
A: Bus cards and door cards are supported currently. The cards that need fingerprint verification as Mi Pay are not supported;
3. Q: How many addresses can be set in the door cards of smart card selection?
A: Up to 4;
4. Q: What limitations does smart card selection have to bus cards?
A: You can only select one bus card. If you have set several bus cards, it is recommended to select the one that you use most;
5. Q: Why the card cannot be waken after the usual address has been set?
A: (1). Please check whether the GPS of your smartphone is normal;
(2). Please check whether the NFC of your smartphone is normal;
(3). If the two points above are normal, inaccurate positioning is one of the reasons. Please restart the smartphone and check it;
6. Q: Can smart card selection and default shortcut card be used simultaneously?
A: Not support. These two are different ways of card swiping. They can only be used alternately, not simultaneously;
7. Q: What are the differences between smart card selection and default shortcut card?
A: Smart card selection is to select the card to swipe based on the card reader and geographic location. As long as you set the usual address, the system will smartly switch the default card to swipe based on your current location information and card reader and other conditions.
The default shortcut card is to select one of the bus cards and door cards as the usual card. As long as you set the custom time, the system will call up other cards during the custom time and automatically call up the frequently used card at other times.
One is for selecting cards at fixed times, and the other is for selecting cards at usual addresses. You can set the service according to your needs.
Does it help?
Yes
No