Home/Support/FAQ/

How to install the Xiaomi Smart Camera C300?

/

How to install the Xiaomi Smart Camera C300?

To install the camera, here are the steps as follows:
1. Use a pencil to mark the positions for the base mounting holes on the wall, then drill two holes at the marked positions. The diameter of each hole is approximately 6mm, and the depth is approximately 30mm;
2. Insert a plastic wall plug into each drilled hole;
3. Place the side of the base with arrows facing forward, and then align the holes. Insert the screws and then tighten them into the wall plugs with a head screwdriver;
4. Align the grooves on the bottom of the camera with the raised part on the base, and then turn it clockwise until it locks into place.
Notes:
1. The wall must be able to support at least three times the total weight of the camera;
2. To prevent possible injury, the camera must be securely fixed to the ceiling or wall according to the installation instructions;
3. The wall mounting kit includes screw-in base accessories for easy installation. For inverted mounting, rotate the screen in the camera settings to display the image normally.