The self-cleaning function mainly focuses on cleaning the roller brush and waterway, while the brush and roller brush cover need to be manually cleaned.
To clean the brush and the brush cover, please refer to the following steps:
1. In the upright shutdown/shutdown state, press the disassembly button of the brush cover and remove the brush cover;
2. Press the roller brush release button and pull out the roller brush outward;
3. Press the protruding button on the handle and rotate it to pull out the cutting blade. Use a cutting knife to cut off the hair wrapped around the roller brush and floor brush body;
4. Rinse the brush cover and brush with tap water until clean, and air dry the brush to prevent odor;
5. Use a dry cloth or tissue to clean the hair, dirt, and foreign objects blocking the suction port on the floor brush;
6. Install the rolling brush and rolling brush cover in order. When installing the rollback brush cover, align it with the slot and hear a "click" sound to indicate that it is installed properly.