The Mi Automatic Foaming Soap Dispenser flashes in orange

If the Mi Automatic Foaming Soap Dispenser flashes in orange, please refer to the following steps to troubleshoot the issue:
1. Check if the sensor area is blocked or covered. Turn the soap dispenser off, clean the sensor area and ensure that nothing is blocking it, and turn it on again;
2. Ensure that the soap reservoir is adequately filled with liquid soap. If the reservoir is empty or low on soap, please refill it;
3. Ensure that the batteries are not depleted. Try replacing them with batteries to see if that resolves the issue;
4. Ensure that the dispenser nozzle is not blocked. Sometimes, soap residue or debris can accumulate and obstruct the flow of soap. Clean the nozzle thoroughly to remove any obstructions;
5. Check if the soap dispenser is properly installed, please install it again;
6. Try turning it off, waiting for a few seconds, and then turning it back on again.
If the above troubleshooting methods can’t resolve the issue, please contact our local official service center or your seller for further assistance. They will help you in this regard.