To use the Manual knob ice maker of the Mijia Refrigerator Cross Door 451L, please refer to the following steps:
1. Close the tray lid, hold the ice cube tray vertically with the water inlet facing upwards, and fill the tray with water to the maximum water level mark.
2. Horizontally place the ice cube tray, and the water will automatically fill the ice compartments. Then, place the ice cube tray into the fridge freezer.
3. After freezing is complete, take out the ice cube tray and remove the lid.
4. Flip over the ice cube tray and twist it to deform, so that ice cubes automatically fall off into the ice storage container.
Note:
1. Do not exceed the maximum water level mark when filling with water; otherwise, the water will overflow.
2. Before using the ice cube tray for the first time, wash the ice cube tray and lid separately with clean water not exceeding 80 ℃.
3. When not in use, rinse the ice cube tray thoroughly and wipe the outside dry with a clean cloth. Store the ice cube tray in a dry, well-ventilated place, away from dust, moisture, and insects.