Why can't the Mijia Rotary Tool Kit power on?

Question

Accepted Answer

If the Mijia Rotary Tool Kit cannot power on, please refer to the following troubleshooting steps and guidance:
1. Check whether the battery is fully charged. A depleted battery will prevent the tool from turning on, so connect it to a compatible charger and allow it to charge before attempting to power on.
2. Ensure correct operation: press and hold the On/Off button for a few seconds to start the tool. A short or light press can not activate the device.
3. Continuous heavy-duty operation can trigger the over-temperature protection, which will temporarily disable the tool to prevent damage. Allow it to cool down before restarting.
4. Applying excessive pressure or force while operating the tool can cause a stall or blockage, activating the stall protection and preventing it from powering on.
5. The tool has an automatic safety mechanism: if used continuously for about 10 minutes, it will automatically shut down to protect the motor and internal components.
6. If none of the above solutions work, please contact the official after-sales service for inspection.