Why can't the Xiaomi Outdoor Camera CW300 charge after being unplugged and plugged back in?
If the Xiaomi Outdoor Camera CW300 fails to charge after the power cable has been unplugged and plugged back in, it is usually caused by issues related to the power connection, the adapter, or the device’s internal protection mechanism.
If the Xiaomi Outdoor Camera CW300 fails to charge after being unplugged and plugged back in, please refer to the following methods:
1. Ensure that the power adapter, cable, and camera charging port are firmly connected. Outdoor dust or moisture can cause poor contact.
2. Check whether the adapter or cable is damaged, bent, or has exposed wires. Try using another compatible power adapter to confirm whether the accessories are faulty.
3. The device must use the original adapter and cable. Third-party chargers can not supply sufficient power for charging.
4. If the camera is connected outdoors, wall outlets, extension cords, or sockets can have unstable output. Try another outlet.
5. Dirt or moisture can block the charging port. Inspect the port and clean it gently if necessary.
6. After reconnecting the power, wait a few seconds for the camera to reboot. If it fails to start, try power-cycling the camera.
7. If the camera overheats or detects abnormal voltage, it can temporarily stop charging. Allow it to cool down for several minutes before reconnecting.
8. If the issue persists, please contact Xiaomi after-sales service center for further assistance.
Does it help?
Yes
No