What to do if there's a water leakage of the Water Inlet Hose of the Mijia Front Load Washer Dryer Pro 9kg?

If the Water Inlet Hose of the Mijia Front Load Washer Dryer Pro 9kg is leaking, please refer to the following methods to troubleshoot:
  1. Check the faucet connection for looseness. Reconnect it using a reliable faucet.
The connection instructions are as follows:
(1). Attach the provided water inlet hose directly to a 6-point (3/4 inch) external thread faucet, ensuring a tight seal.
(2). Connect the other end of the water inlet hose to the washer dryer's water inlet valve (located at the back), and tighten it clockwise to secure.
(3). Turn on the faucet and check all connections for leaks. If leaks are found, tighten the affected fitting following prior steps. If the faucet itself leaks, replace it promptly.
  1. If the water inlet hose connector is leaking, contact after-sales service for a new hose.

Does it help?

Yes
No