How to deal with the uneven front and back of the Mijia Refrigerator Cross Door 510L door?

If the front and back of the Mijia Refrigerator Cross Door 510L door are uneven, please follow the following methods to troubleshoot:
  1. Use the adjustment gasket provided in the accessories to adjust, lift the lower side door body, and use pliers to insert the gasket into the hinge shaft gap. Please be careful when operating.
  2. Check whether there are protrusions on the door seal that cause the door to be uneven. Please clean the door seal.
(1). Use hot air to evenly heat the door seal, and please note that blow air evenly at a low wind speed, and do not deform the door seal.
(2). Smooth the door seal airbag by hand (Squeeze the door seal along the door frame to install the door seal in place).
(3). Wait for the door seal to be fixed after cooling.
If the issue still persists, please apply for local after-sales service center inspection.

Does it help?

Yes
No