Why does the Xiaomi Robot Vacuum 5 Pro interrupt its current task during cleaning?

Question

Accepted Answer

If the Xiaomi Robot Vacuum 5 Pro interrupts its current task during cleaning, there are several possible reasons and steps to address the issue.
The main reasons for task interruption and related precautions are as follows:
Make sure the main unit is not in Do Not Disturb mode. If this mode is active, the robot vacuum will not resume cleaning until the period has ended.Manual recharging or placing the main unit back onto the omni station does not automatically resume the cleaning task. The device will need to be restarted or the task manually resumed through the Xiaomi Home App or control panel.Verify that the charging status is stable. Poor contact between the charging contacts and the omni station can cause interruptions or result in the battery charging to less than the specified level, which can prevent the robot vacuum from continuing its task.
The Xiaomi Robot Vacuum 5 Pro will charge when the battery is low, and will continue to work after it is charged to the appropriate level. The area of a normal home is within 150 square meters, and the cleanable area is half of the house area. A full charge can basically complete the task in one go.
The reasons for starting to charge before the cleaning cycle is complete are as follows:
If the working time of a single task exceeds the battery endurance, vacuuming before mopping, or vacuuming twice is more likely to trigger low-battery recharging, and then continuing to vacuum from the breakpoint to continue working, the working time becomes longer. This is a normal phenomenon.If the cleaning mode is turned on with super suction and fine vacuuming and mopping, the power consumption increases, which can also cause the inability to complete the recharging of a single task.The battery endurance will decrease with the number of charge and discharge times, which can also cause the inability to complete the recharging of a single task.