How to install the Base Plate on the Mijia Front Load Washer Dryer 10.5kg?
The Mijia Front Load Washer Dryer 10.5kg requires proper base plate installation to ensure stability and protection.
To install the Base Plate on the Mijia Front Load Washer Dryer 10.5kg, please refer to the following steps:
1. Check whether the Base Plate is intact and whether the accessory screws are missing. Tilt the washing machine and lay it down on a soft fabric to prevent scratches;
2. Adjust the position of the bottom plate and tighten the 8 screws with a cross screwdriver. Install the Base Plate in the direction of the arrow on the Base Plate, install the buckle/screw to the bottom of the washing machine, and check whether the Base Plate is firmly installed;
3. Lift the washer dryer and put it back to its upright position.
Note:
Lay the back of the washing machine down before removing the transport bolts. Lay the machine flat, expose the bottom of the washing machine, and remove the foam base. The ground must be protected by packaging cartons or foam.
To install the Base Plate on the Mijia Front Load Washer Dryer 10.5kg, please refer to the following steps:
1. Check whether the Base Plate is intact and whether the accessory screws are missing. Tilt the washing machine and lay it down on a soft fabric to prevent scratches;
2. Adjust the position of the bottom plate and tighten the 8 screws with a cross screwdriver. Install the Base Plate in the direction of the arrow on the Base Plate, install the buckle/screw to the bottom of the washing machine, and check whether the Base Plate is firmly installed;
3. Lift the washer dryer and put it back to its upright position.
Note:
Lay the back of the washing machine down before removing the transport bolts. Lay the machine flat, expose the bottom of the washing machine, and remove the foam base. The ground must be protected by packaging cartons or foam.
Does it help?
Yes
No