What is the ideal location for installing the Mijia Air Conditioner Pro Eco 3.5 kW?
Installation of the Mijia Air Conditioner Pro Eco 3.5 kW requires a certain level of expertise. We recommend scheduling an on-site installation service rather than attempting to install the unit yourself.
The main installation locations are as follows:
Outdoor unit location selection:
1. Avoid exposure to direct sunlight or strong wind;
2. Keep away from heat sources, steam sources, and places with flammable gas leakage and smoke;
3. Select a place that is not exposed to rain and has good ventilation;
4. Choose a place where the air outlet and operating noise of the air conditioner will not disturb other people or animals, or plants;
5. Make sure the installation space is not smaller than the requirements in the lower left picture;
6. Make sure the air outlet is open and unobstructed to avoid affecting the performance;
7. The outdoor unit shall not occupy public sidewalks. If the outdoor unit is installed along buildings on both sides of the road, the distance from the bottom of the outdoor unit mounting bracket to the ground shall be greater than 25cm. On the condition that the outdoor unit mounting bracket does not affect the public passages, the distance from the bottom of the outdoor unit to the ground shall be greater than 25cm;
8. To ensure the room temperature regulation effect, it is recommended to remove the obstructions like the shutter in front of the outdoor unit when installing. If such obstructions cannot be removed, the air outlet of the outdoor unit shall be placed as close to the shutter as possible;
9. The installation location shall be firm and reliable. Otherwise, it will increase operating noise and vibration and bring danger.
Indoor unit location selection:
1. Avoid direct sunlight;
2. There are no obstacles at the air inlet and outlet to maintain good air circulation;
3. It is convenient for the drainage pipe to drain water;
4. The distance to radio devices (such as TV or radio) is greater than 1m;
5. The air conditioner shall be installed on a wall that can bear the indoor unit's weight and does not increase the operating noise and vibration;
6. The minimum clearance between the auxiliary electric heating air conditioners and the surface's combustible materials is 1.5m;
7. The auxiliary electric heating components are assembled and fixed in the indoor unit evaporator. They are ceramic PTC electric heating elements. The input power can be found in the "input Power for the Auxiliary Electric Heater (PTC)" on the nameplate (models without "input Power for the Auxiliary Electric Heater (PTC)" on the nameplate do not have this component).
Note:
To install the indoor and outdoor units according to the spacing shown in the User Manual to achieve better results.
The main installation locations are as follows:
Outdoor unit location selection:
1. Avoid exposure to direct sunlight or strong wind;
2. Keep away from heat sources, steam sources, and places with flammable gas leakage and smoke;
3. Select a place that is not exposed to rain and has good ventilation;
4. Choose a place where the air outlet and operating noise of the air conditioner will not disturb other people or animals, or plants;
5. Make sure the installation space is not smaller than the requirements in the lower left picture;
6. Make sure the air outlet is open and unobstructed to avoid affecting the performance;
7. The outdoor unit shall not occupy public sidewalks. If the outdoor unit is installed along buildings on both sides of the road, the distance from the bottom of the outdoor unit mounting bracket to the ground shall be greater than 25cm. On the condition that the outdoor unit mounting bracket does not affect the public passages, the distance from the bottom of the outdoor unit to the ground shall be greater than 25cm;
8. To ensure the room temperature regulation effect, it is recommended to remove the obstructions like the shutter in front of the outdoor unit when installing. If such obstructions cannot be removed, the air outlet of the outdoor unit shall be placed as close to the shutter as possible;
9. The installation location shall be firm and reliable. Otherwise, it will increase operating noise and vibration and bring danger.
Indoor unit location selection:
1. Avoid direct sunlight;
2. There are no obstacles at the air inlet and outlet to maintain good air circulation;
3. It is convenient for the drainage pipe to drain water;
4. The distance to radio devices (such as TV or radio) is greater than 1m;
5. The air conditioner shall be installed on a wall that can bear the indoor unit's weight and does not increase the operating noise and vibration;
6. The minimum clearance between the auxiliary electric heating air conditioners and the surface's combustible materials is 1.5m;
7. The auxiliary electric heating components are assembled and fixed in the indoor unit evaporator. They are ceramic PTC electric heating elements. The input power can be found in the "input Power for the Auxiliary Electric Heater (PTC)" on the nameplate (models without "input Power for the Auxiliary Electric Heater (PTC)" on the nameplate do not have this component).
Note:
To install the indoor and outdoor units according to the spacing shown in the User Manual to achieve better results.
Does it help?
Yes
No