What does the Xiaomi Tabletop Dishwasher control panel have?

The introductions for the Xiaomi Tabletop Dishwasher control panel are as follows:
1. Once the dishwasher is connected to the power supply, all indicators on the display are lit for 1 second. Then, the dishwasher is turned off. Open the faucet and 3-way faucet valve to allow the dishwasher to be connected to the water source;
2. To turn on the dishwasher, press the power button after the dishwasher is connected to the power supply and water source, and then the indicators will light up. To turn off the dishwasher, press the power button when the dishwasher is in standby mode. The dishwasher will automatically turn off if no operation is performed for 3 minutes in the non-running state, and the display will go out. To forcibly turn off the dishwasher, press and hold the power button for 3 seconds when the dishwasher is running;
3. Press the button on the top to unlock the door, and grip the top groove of the upper door to open it. Close the upper door, and push in the lower door with both hands holding both sides to lock the upper door and lower door tightly;
4. When the dishwasher is in washing status, press the pause button to pause the current washing mode. When the dishwasher is paused, press the pause button to resume the current washing mode;
5. When the dishwasher is in standby status, select and press a washing mode button on the control panel, and then press the pause button to start washing. If you want to change the washing mode when the dishwasher is running, press the pause button and power button in sequence to exit the current washing mode, and the dishwasher will return to the standby status. Then, you can select the desired washing mode;
6. The UV dry storage feature can be manually enabled or disabled when the dishwasher is in standby mode or running status. Press the UV dry storage button to enable or disable the feature, and the UV dry storage indicator will light up or go out correspondingly. When the UV dry storage feature is enabled, the dishwasher automatically enters the UV dry storage status after each washing program is completed.
The default cycle of the UV dry storage feature is 24 hours, and the cycle is automatically reset after each washing operation is completed. To change the cycle, press and hold the UV dry storage button when the dishwasher is in standby mode, and the display blinks. Press the UV dry storage button again to switch the cycle of 24/48/72/96 hours. Stay in the selected cycle unchanged for 3 seconds, and it takes effect automatically. Then the display returns to standby status.
The UV dry storage feature is accompanied by slight fan sounds and vibrations, which is normal. To exit from this feature, first press the pause button to pause and then press the power button to end it. Or you can press the UV dry storage button to disable the feature.
The UV dry storage feature runs for a long period. If there is no operation within 3 minutes after the feature starts, the display automatically goes out for energy saving. In this case, you can press any button to wake up the display.
Note:
Except for the Rapid mode, all washing modes support the UV dry storage feature.