How to install the Xiaomi Smart Pet Fountain 2?
To install the Xiaomi Smart Pet Fountain 2, please refer to the following steps:
1. Remove the drinking tray, water pipe, filter holder, filter and water tank, and clean these parts. Do not use hot or boiling water for cleaning;
Note:
(1). Do not submerge the main unit in water, however, it can be rinsed with water. Ensure that the waterproof rubber plug on the power port is securely closed before rinsing;
(2). The water pump can not be removed. Do not unplug the power cord that connects the drinking tray and the water pump. The pre-filter can be removed for cleaning;
(3). Remove the filter holder and the filter.
2. Rinse the filter with clean water for two minutes to remove the floating carbon powder generated by the collisions of the activated carbon during transportation;
3. Place the filter into the filter holder, and then install the entire filter holder into the bottom of the drinking tray Press the filter inward until you hear a click, indicating it is correctly installed. Connect the water pipe to the drinking tray and water pump. Put the drinking tray back on the water tank.
Note:
(1). Do not submerge the main unit in water, however, it can be rinsed with water. Ensure that the waterproof rubber plug on the power port is securely closed before rinsing;
(2). The water pump can not be removed. Do not unplug the power cord that connects the drinking tray and the water pump. The pre-filter can be removed for cleaning;
(3). Remove the filter holder and the filter.
2. Rinse the filter with clean water for two minutes to remove the floating carbon powder generated by the collisions of the activated carbon during transportation;
3. Place the filter into the filter holder, and then install the entire filter holder into the bottom of the drinking tray Press the filter inward until you hear a click, indicating it is correctly installed. Connect the water pipe to the drinking tray and water pump. Put the drinking tray back on the water tank.
Does it help?
Yes
No