Xiaomi Straw Mug FAQ
Overview
1. Q: What are the features of the Xiaomi Straw Mug?
A: For your reference, the features of the Xiaomi Straw Mug are as follows:
1. The straw and direct drinking mouth design allows for two ways to drink, suitable for various scenarios like office use or outdoor camping;
2. With a bottom diameter of 75mm, it fits over 80% of car cup holders, meeting in-car needs;
3. A 1L capacity satisfies daily hydration needs without frequent refills;
4. Made with a 316L stainless steel inner layer, the mug ensures durability while accommodating various beverages, promoting healthier drinking. The 5-layer insulation design provides extended heat retention (for hot insulation, after 6 hours, the temperature is about 55°C; for cold insulation, after 6 hours, the temperature is about 10°C).
2. Q: What precautions should be taken when using the Xiaomi Straw Mug for the first time?
A: 1. Before first use, be sure to clean the mug thoroughly. Do not drink hot drinks above 50°C to avoid burns;
2. Installing the Straw: Open the straw seal, insert the angled end of the straw into the mug, and then refer to the picture to attach the shorter section of the silicone straw to the exposed part of the straw;
3. Placement: Place the mug upright with the opening facing up on a flat surface;
4. Filling Limit: The maximum water level should be at least 1cm below the bottom edge of the mug lid to prevent spills that could cause burns or dirty clothes;
5. Minimizing the number of times the lid is opened helps improve hot insulation (or cold insulation) effectiveness;
6. If not used for an extended period, keep the mug clean and dry both inside and out.
3. Q: Can the Xiaomi Straw Mug hold milk or baby food like rice porridge?
A: It should not be used for long-term storage of dairy products or baby food (there is a risk of bacterial growth).
4. Q: Can the Xiaomi Straw Mug be heated in a microwave or other heating devices?
A: It cannot be washed in a dishwasher or heated in a microwave or other heating devices.
5. Q: How to clean the Xiaomi Straw Mug?
A: For daily cleaning, please use a soft cloth or damp sponge with a neutral detergent. Do not use bleach, abrasive powders, metal brushes, stain removers, or chlorine-based cleaners to avoid scratching the product, causing rust, or corrosion.
6. Q: How effective is the Xiaomi Straw Mug's hot insulation?
A: In an indoor environment with a temperature of 20°C ± 5°C, open the mug lid and leave the empty mug for 30 minutes, then add 100°C water to the lower edge line of the mug lid, and wait until the water temperature in the mug drops to 95°C ± 1°C, immediately close the mug lid tightly and start timing. After 6 hours, the water temperature is above 55°C.
7. Q: How effective is the Xiaomi Straw Mug's cold insulation?
A: In an indoor environment with a temperature of 20°C ± 5°C, open the mug lid and leave the empty mug for 30 minutes, then add 0°C water to the lower edge line of the mug lid, and wait until the water temperature in the mug rises to 4°C ± 1°C, immediately close the mug lid tightly and start timing. After 6 hours, the water temperature is below 10°C.
8. Q: What precautions should be taken when using the Xiaomi Straw Mug?
A: 1. Be sure to thoroughly clean the mug before the first use;
2. Keep the mug out of the reach of babies and children to avoid burns;
3. Do not use the mug to drink or eat while driving to avoid causing danger;
4. Before use, make sure the sealing ring is installed correctly to avoid water leakage, burns, or affecting the hot/cold insulation performance;
5. When drinking water, do not tilt the mug too sharply. Drink slowly in small sips to avoid choking or burns;
6. Do not overfill the mug with drinks to avoid overflow;
7. Do not store dairy products or baby food for an extended period of time to prevent bacteria growth;
8. Do not put dry ice or carbonated drinks into the mug to avoid accidental injury;
9. When filling the mug with liquids such as tea, salty soups, or dairy products, try to empty and clean it in time to avoid rust, perforations, or corrosion;
10. When filling the mug with oily liquids, try to empty and clean it in time to prevent oil stains from forming on the mug that can't be cleaned;
11. Avoid dropping, bumping, or strong attack to the mug to prevent causing dents on the surface that can affect its performance;
12. Do not place the mug near heat sources such as electric heaters or gas stoves to avoid discoloration or deformation;
13. Do not steam or boil any part of the mug, and do not use or clean it in a microwave, dishwasher, sterilizer, or dryer;
14. Do not use sharp objects to scrub the mug, and do not use bleach, abrasive powder, scouring powder, or chlorine-containing detergents to clean it to avoid rust or corrosion;
15. Please ensure that the mug remains upright and the lid is tightly closed when placed in the bag to avoid leakage or burns.
9. Q: What precautions should be taken when cleaning the Xiaomi Straw Mug?
A: 1. After filling the mug with drinks other than drinking water, make sure to clean the mug promptly and dry it thoroughly to avoid smell or mold;
2. It is recommended to disassemble and deep clean the detachable parts of the mug regularly;
3. When cleaning, use a detergent intended for tableware, and special cleaning products such as soft sponges and cloths.
1. Q: What are the features of the Xiaomi Straw Mug?
A: For your reference, the features of the Xiaomi Straw Mug are as follows:
1. The straw and direct drinking mouth design allows for two ways to drink, suitable for various scenarios like office use or outdoor camping;
2. With a bottom diameter of 75mm, it fits over 80% of car cup holders, meeting in-car needs;
3. A 1L capacity satisfies daily hydration needs without frequent refills;
4. Made with a 316L stainless steel inner layer, the mug ensures durability while accommodating various beverages, promoting healthier drinking. The 5-layer insulation design provides extended heat retention (for hot insulation, after 6 hours, the temperature is about 55°C; for cold insulation, after 6 hours, the temperature is about 10°C).
2. Q: What precautions should be taken when using the Xiaomi Straw Mug for the first time?
A: 1. Before first use, be sure to clean the mug thoroughly. Do not drink hot drinks above 50°C to avoid burns;
2. Installing the Straw: Open the straw seal, insert the angled end of the straw into the mug, and then refer to the picture to attach the shorter section of the silicone straw to the exposed part of the straw;
3. Placement: Place the mug upright with the opening facing up on a flat surface;
4. Filling Limit: The maximum water level should be at least 1cm below the bottom edge of the mug lid to prevent spills that could cause burns or dirty clothes;
5. Minimizing the number of times the lid is opened helps improve hot insulation (or cold insulation) effectiveness;
6. If not used for an extended period, keep the mug clean and dry both inside and out.
3. Q: Can the Xiaomi Straw Mug hold milk or baby food like rice porridge?
A: It should not be used for long-term storage of dairy products or baby food (there is a risk of bacterial growth).
4. Q: Can the Xiaomi Straw Mug be heated in a microwave or other heating devices?
A: It cannot be washed in a dishwasher or heated in a microwave or other heating devices.
5. Q: How to clean the Xiaomi Straw Mug?
A: For daily cleaning, please use a soft cloth or damp sponge with a neutral detergent. Do not use bleach, abrasive powders, metal brushes, stain removers, or chlorine-based cleaners to avoid scratching the product, causing rust, or corrosion.
6. Q: How effective is the Xiaomi Straw Mug's hot insulation?
A: In an indoor environment with a temperature of 20°C ± 5°C, open the mug lid and leave the empty mug for 30 minutes, then add 100°C water to the lower edge line of the mug lid, and wait until the water temperature in the mug drops to 95°C ± 1°C, immediately close the mug lid tightly and start timing. After 6 hours, the water temperature is above 55°C.
7. Q: How effective is the Xiaomi Straw Mug's cold insulation?
A: In an indoor environment with a temperature of 20°C ± 5°C, open the mug lid and leave the empty mug for 30 minutes, then add 0°C water to the lower edge line of the mug lid, and wait until the water temperature in the mug rises to 4°C ± 1°C, immediately close the mug lid tightly and start timing. After 6 hours, the water temperature is below 10°C.
8. Q: What precautions should be taken when using the Xiaomi Straw Mug?
A: 1. Be sure to thoroughly clean the mug before the first use;
2. Keep the mug out of the reach of babies and children to avoid burns;
3. Do not use the mug to drink or eat while driving to avoid causing danger;
4. Before use, make sure the sealing ring is installed correctly to avoid water leakage, burns, or affecting the hot/cold insulation performance;
5. When drinking water, do not tilt the mug too sharply. Drink slowly in small sips to avoid choking or burns;
6. Do not overfill the mug with drinks to avoid overflow;
7. Do not store dairy products or baby food for an extended period of time to prevent bacteria growth;
8. Do not put dry ice or carbonated drinks into the mug to avoid accidental injury;
9. When filling the mug with liquids such as tea, salty soups, or dairy products, try to empty and clean it in time to avoid rust, perforations, or corrosion;
10. When filling the mug with oily liquids, try to empty and clean it in time to prevent oil stains from forming on the mug that can't be cleaned;
11. Avoid dropping, bumping, or strong attack to the mug to prevent causing dents on the surface that can affect its performance;
12. Do not place the mug near heat sources such as electric heaters or gas stoves to avoid discoloration or deformation;
13. Do not steam or boil any part of the mug, and do not use or clean it in a microwave, dishwasher, sterilizer, or dryer;
14. Do not use sharp objects to scrub the mug, and do not use bleach, abrasive powder, scouring powder, or chlorine-containing detergents to clean it to avoid rust or corrosion;
15. Please ensure that the mug remains upright and the lid is tightly closed when placed in the bag to avoid leakage or burns.
9. Q: What precautions should be taken when cleaning the Xiaomi Straw Mug?
A: 1. After filling the mug with drinks other than drinking water, make sure to clean the mug promptly and dry it thoroughly to avoid smell or mold;
2. It is recommended to disassemble and deep clean the detachable parts of the mug regularly;
3. When cleaning, use a detergent intended for tableware, and special cleaning products such as soft sponges and cloths.
Does it help?
Yes
No