How to set the Do Not Disturb function on the Redmi Watch 5 Active?

When the Do Not Disturb mode is activated, incoming calls and APP notifications will be silenced. However, system reminders, such as alarms, will still be notified. If you enable Do Not Disturb mode synchronization in the APP, the watch and phone will remain connected, and the Do Not Disturb status will be synchronized in both directions. This means that if the Do Not Disturb is turned on at one terminal, it will also be activated at the other terminal.
To set the Do Not Disturb function on the watch, please refer to the following methods:
1. Slide into the control center on the watch, tap the Do Not Disturb mode icon to turn on/off, and a shortcut time list will pop up when you select to turn on. You can select the required Do Not Disturb time in the list;
2. Go to the [Settings] on the watch >> [DND] >> tap to turn on/off;
3. Go to the [Settings] on the watch >> [DND] >> [Scheduled] >> set start and end time. The watch will turn on DND mode at a fixed time within the duration;
4. Go to the [Settings] on the watch >> [DND] >> sleep do not disturb. The watch turns on Do Not Disturb mode after detecting sleep and turns on Do Not Disturb mode at a fixed time within the set period.
Note:
The Do Not Disturb synchronization function is only supported on Android 11.0 and above phones.