Product Overview

1.Q: What are the characteristics of the Redmi Watch 5 Lite?

1. 1.96 inch AMOLED square large screen, with metal NCVM middle frame and TPU strap;
2. 18 days long endurance, supporting magnetic charging, providing efficiency and continuous power;
3. 2 MIC noise reduction, making the call clearer;
4. With its own speaker, it supports Bluetooth call function. You can use the watch to easily complete the phone call during driving, sports, work or other inconvenient scenes;
5. It supports health monitoring functions such as heart rate, sleep and blood oxygen, and all-round health tracking to help you maintain a healthy life;
6. It has more than 160 sports modes;
7. It has more than 200 watch faces with different color schemes.

2.Q: What are the differences between the Redmi Watch 5 Lite and the Redmi Watch 3 Active?

1. Screen and material: The Redmi Watch 5 Lite uses a 1.96-inch AMOLED screen. The Redmi Watch 3 Active uses 1.83 inch LCD screen;
2. MIC: The Redmi Watch 5 Lite uses dual MIC noise reduction. The Redmi Watch 3 Active uses single MIC noise reduction.

3.Q: What is the material of the Redmi Watch 5 Lite screen and middle frame?

4.Q: What is the material of the Redmi Watch 5 Lite strap?

5.Q: How to replace the Redmi Watch 5 Lite strap?

1. Remove the strap: Hold on the quick-release button with one hand and remove the strap with the other hand;
2. Installation of the watch: Insert the strap into the quick-release buckle, then push until you hear a click. The strap is now attached. Pull on the strap to check that it is attached properly.

6.Q: What are the Redmi Watch 5 Lite strap-wearing circumferences and fitting models?

7.Q: Can the Redmi Watch 5 Lite be used with the straps of other Xiaomi watches?

8.Q: What is the Redmi Watch 5 Lite waterproof rating?

9.Q: What does the Redmi Watch 5 Lite come with in standard? What colors are there?

10.Q: Does the Redmi Watch 5 Lite support connecting heart rate bands?

11.Q: Does the Redmi Watch 5 Lite support independent satellite positioning?

12.Q: What is the correct way to wear the Redmi Watch 5 Lite?

13.Q: Is the Redmi Watch 5 Lite allergic?

1. During exercise, wearing should not be too loose or too tight to ensure that the watch does not slide up and down on the wrist;
2. For daily use, the strap can be slightly relaxed to ensure a comfortable experience of skin ventilation. After wearing it continuously for a long time, the watch can be removed and the wrist can rest for about half an hour;
3. After exercise, clean and wipe the sweat on the arms and the strap. Clean and dry it before wearing it.

14.Q: Is the monitoring effect of the Redmi Watch 5 Lite the same as on the right hand when worn on the left hand?

15.Q: Can the Redmi Watch 5 Lite be worn to swim or take a bath?

16.Q: How far does the Redmi Watch 5 Lite disconnect from your phone?

17.Q: How to clean the Redmi Watch 5 Lite?

1. Do not flush directly at the microphone or vent hole of the watch. One hole on one side of the watch is the microphone and the vent hole is on the strap side;
2. Please avoid the contact with substances that will cause dirt or damage, such as dust, sand, lampblack, hand sanitizer, soapy water, cosmetics, salt water, pool water, perfume, insect repellent, detergent, sunscreen, adhesive, hair dye or other acid and alkaline substance solvents.

18.Q: How to adjust the screen brightness of the Redmi Watch 5 Lite?

19.Q: Does the Redmi Watch 5 Lite support Bluetooth disconnect reminders?

20.Q: Does the Redmi Watch 5 Lite support wrist lifting to answer the phone?

21.Q: What are the meanings of control center icons on the Redmi Watch 5 Lite?

22.Q: What are the meanings of function icons on the Redmi Watch 5 Lite?

Charging and Battery Life

1.Q: How does the Redmi Watch 5 Lite last? How long can it be fully charged?

2.Q: What is the battery capacity of the Redmi Watch 5 Lite? How to charge it?

1. The charging cable is aligned with the contact points on the back of the watch, and the charging cable is automatically adsorbed on the watch;
2. Connect the other end of the charging cable to the USB-A charger (please match the adaptation with the output voltage of 5 V).

1. If the watch cannot be turned on after being placed for a long time, it needs to be pre-charged for a period of time before the charging icon is displayed when it is used again;
2. Please tear off the protective film on the back of the watch before using the charging cable, and ensure that there are no other foreign objects for normal use.

3.Q: Is the charging cable of the Redmi Watch 4 compatible with the Redmi Watch 5 Lite?

4.Q: Why does the Redmi Watch 5 Lite consume power fast and have a short standby time?

5.Q: What to do if the battery drops quickly after getting the Redmi Watch 5 Lite for the first time?

Device Connection

1.Q: Does the Redmi Watch 5 Lite support iOS/Android system?

2.Q: Why the Redmi Watch 5 Lite cannot be found after the Xiaomi Wear App is downloaded and installed?

3.Q: How to bind the Redmi Watch 5 Lite with the mobile phone?

1. Press the power button for a long time to turn the watch on. Use your mobile phone to scan the QR code on the watch screen, or search for Mi Fitness in the App store. Download and install the Mi Fitness App;
2. Open the Mi Fitness App, and allow the App-related permissions according to the pop-up prompts. Tap [Add device], and tap [Scanner]. If you use other Andriod devices to connect the watch, when the watch's Bluetooth name Appears in the Bluetooth settings interface of the phone, tap to pair. When the phone displays the same security code as the watch screen, tap [Pair] to complete the pairing connection with the watch;
3. If you use an iOS device to connect the watch, after selecting the binding or scanning the QR code on the device, you will be prompted to connect the device to the Bluetooth list. After selecting the Redmi Watch 5 Lite, a dual-ended pairing interface will pop up, tap [Pair], and then return to the App to add the device through the pairing list.

1. Select language;
2. Scan with the App;
3. Start binding;
4. Find the Bluetooth name;

5. Pair on watch and phone;
6. The watch will automatically display the QR code page. Manually returns to the App to scan again on the phone;

7. Scan with the App and verify;
8. Pair on watch and phone;

9. Pairing automatically;
10. Added successfully.

1. During the pairing process, please confirm that the Bluetooth of the mobile phone is on to ensure a normal connection between the watch and the mobile phone;
2. If the security code has popped up on the watch, however, the pop-up window for confirming pairing is not displayed on the mobile phone, please find the pairing request in the notifications of the mobile phone;
3. If the watch cannot be found during the process of adding the device, or the watch cannot be connected during use, please try to press the watch power button for 3 seconds, select reset in the system operation interface, and then add the watch again.

4.Q: How to unbind the Redmi Watch 5 Lite?

1. For Android phones, open the Mi Fitness App and tap [Unpair] on the [Device] interface. For iOS phones, open the Mi Fitness App, tap [Additional settings] on the [Device] interface, and then tap [Unpair];
2. After the watch resumes its factory settings, it will automatically unbind from the mobile phone;
3. After unbinding, the watch will resume its factory settings and all data will be emptied.

5.Q: Can the Mi Fitness App bind multiple devices?

6.Q: How does the Mi Fitness App switch watches?

7.Q: How to upgrade the system firmware of the Redmi Watch 5 Lite?

1. In the Mi Fitness App >> [Device] >> tap [Update] to check and update (Android). In the Mi Fitness App >> [Device] >> [Additional settings] >> tap [Firmware updates] to check and update (iOS);
2. If you find that the new version can be updated, tap to download the upgrade package;
3. After downloading the upgrade package, it will be automatically pushed to the watch. After receiving the upgrade package, the watch will be automatically upgraded and restarted.

8.Q: What account does the Mi Fitness App support to log in?

9.Q: How to keep the connection of the Redmi Watch 5 Lite to the Mi Fitness App?

10.Q: Does the Redmi Watch 5 Lite support phone alarm synchronization?

11.Q: How to bind the Redmi Watch 5 Lite to another phone after changing the phone?

12.Q: Why cannot the time of the Redmi Watch 5 Lite and the phone be synchronized?

Message Alert Related

1.Q: How to set App notification reminders for the Redmi Watch 5 Lite?

1. You need to turn on the notification authority of the mobile phone at the same time;
2. If the message cannot be synchronized after opening, open the App and refer to [Help on notifications];
3. When the watch receives the message reminder by default, it only vibrates and does not actively light the screen. When viewing the message, you can lift your wrist to light the screen or manually light the screen. It can automatically light up the screen by opening the Mi Fitness App >> [App notifications] >> enable [Wake screen], then the device will automatically light the screen when receiving the message;
4. The watch will also be alerted by default only when wearing the watch. You can set in the Mi Fitness App >> [App notifications] >> turn on/off the [Notify only when worn] switch.

2.Q: Does the Redmi Watch 5 Lite support the notification light up screen function?

3.Q: How to view/delete notification messages on the Redmi Watch 5 Lite?

1. The watch can save up to 10 recent notification messages. After exceeding this limit, every new notification received will automatically delete the earliest notification;
2. Tap on the list of the notification center to enter the notification details, and tap [Clear] on the notification center to delete this notification;
3. In the notification center, slide to the left to delete this notification;
4. Slide down to the bottom of the notifications and tap [Clear all] to delete all notifications (except focus notifications);
5. Aggregated messages will display the total number of messages in the list. Aggregated messages can only slide left or enter the aggregated message group to delete this group of messages;

6. The message that can be opened on the phone is only supported in some applications, with the model of Android 11.0 and above, and the watch and mobile phone are connected.

4.Q: How to open the message on the phone by tApping the notification details on the Redmi Watch 5 Lite?

1. The Mi Fitness App keeps running in the background;
2. The mobile phone does not lock the screen, and the mobile phone does not enter another interface when the screen is locked;
3. Some mobile phones cannot enter the message interface and open mobile phone applications;
4. The compatibility between the mobile phone system and the application is important, and some calls that do not take effect. The current function is trying to adapt to more models, please wait patiently.

5.Q: Why doesn’t the Redmi Watch 5 Lite take effect when tApping the notification details to open it on the phone?

1. Whether the Mi Fitness App keeps running in the background. If it is not turned on, please turn on the background permission;
2. Whether the mobile phone currently has a lock screen. In the lock screen state, the mobile phone can not enter another interface;
3. The current function is trying to adapt to more models, please wait patiently;
4. iOS phones do not support this feature.

6.Q: Does the Redmi Watch 5 Lite support incoming call reminders?

1. The caller ID name is consistent with the phone;
2. If do not disturb mode is turned on and during the do not disturb period, you will not receive an incoming call reminder;
3. The Mi Fitness App needs to be running in the background;
4. The watch supports Bluetooth calls. Bluetooth is dual-mode Bluetooth. The incoming call reminder function is turned on by default and cannot be turned off separately. There will be no incoming call reminder during the do not disturb mode.

7.Q: Does the Redmi Watch 5 Lite support quick SMS reply to incoming calls?

8. Q: Does the Redmi Watch 5 Lite support emoji display?

9. Q: Why can't the Redmi Watch 5 Lite receive incoming call notifications?

1. Whether to turn on the Do Not Disturb mode;
2. Whether to turn on Do Not Disturb synchronization and turn on Do Not Disturb mode on the mobile phone;
3. Whether to turn on sleep mode;
4. Whether it is not worn, and enable the Notify only when worn function.

10. Q: Why can't the Redmi Watch 5 Lite receive message notifications?

1. Whether to turn on Do Not Disturb mode;
2. Whether to turn on Do Not Disturb synchronization and turn on Do Not Disturb mode on the phone;
3. Whether to turn on sleep mode;
4. Whether to enter a sleep state.

1. Please confirm that the mobile phone’s Bluetooth is connected to the device. If it is not connected, please tap to connect;
2. Next, if it is not connected, please ignore the device and enter the App to repair the device. At the same time, after the App pops up, allow it to pair with the device;
3. If the mobile phone’s Bluetooth is connected, please tap the small icon beside the connected device to enter the watch Bluetooth details interface to confirm whether the sharing system notification is open. If not, please tap to open.

11. Q: What is the number of words and messages of the message reminders of the Redmi Watch 5 Lite?

12. Q: The motor vibration is weak when there are incoming calls, alarms and message notifications. How to increase the motor vibration of the Redmi Watch 5 Lite?

13. Q: Why iOS phones cannot set the Receive only when phone is locked feature of the Redmi Watch 5 Lite?

14. Q: What is the message reading mechanism of the Redmi Watch 5 Lite?

Watch Face Related

1.Q: How to download/remove the watch face of the Redmi Watch 5 Lite?

2.Q: How to change the watch face of the Redmi Watch 5 Lite?

3.Q: How many watch faces does the Redmi Watch 5 Lite support?

4.Q: Does the Redmi Watch 5 Lite have the Always-on display function? How to turn it on?

5.Q: How to switch photos on the Redmi Watch 5 Lite?

6.Q: How to enter the watch face small icons such as the weather on the Redmi Watch 5 Lite?

7.Q: Can the watch face background (album background) of the Redmi Watch 5 Lite be customized?

1. Open the Mi Fitness App, connect and synchronize the device correctly;
2. On the device interface of the Mi Fitness App, tap [Manage watch faces];
3. Select the online watch face and tap [All], and tap [Custom];
4. Select the watch face style and select the preferred photos. Then download and Apply it.

System Settings

1.Q: How to boot, shut down and restart the Redmi Watch 5 Lite?

1. In the power-on state, pressing the power button for a long time will enter the interface of restarting, shutting down, connecting a new mobile phone, restoring factory settings, and select shutdown;
2. In the power-on state, tap [Settings] >> [System] >> select [Power off].

1. When the watch is turned on, pressing the power button for a long time will enter the interface of restarting, shutting down and restoring the factory. Select restart;
2. When the watch is turned on, press the power button for more than 12 seconds, and the watch will be forced to restart;
3. When the watch is turned on, tap [Settings] >> [System] >> select [Reboot].

2.Q: What are the regular operations of the Redmi Watch 5 Lite? What are the functions of the buttons?

1. Slide down on the watch face: open the notifications;
2. Slide up on the watch face: open the control center;
3. Slide left and right on the watch face: switch widgets;
4. Slide right from the left edge of the watch face: return to the previous interface.

1. Press to enter the application list/return to the watch face;
2. Press and hold on for 3s to boot, or enter the options of shutdown/restart/connect a new phone/restore factory settings;
3. Press and hold on for 12s or more to force it to restart;
4. Triple press (3 consecutive presses within 2 seconds) to call the emergency contact.

3.Q: How to customize widgets of the Redmi Watch 5 Lite?

4.Q: How to customize the shortcut function of the Redmi Watch 5 Lite?

5.Q: How to set the Do Not Disturb mode of the Redmi Watch 5 Lite?

1. Slide into the control center on the watch, tap the Do Not Disturb mode icon to turn on/off, and a shortcut time list will pop up when you select to open. You can select the required Do Not Disturb time in the list;
2. Go to the watch settings >> [DND] >> tap to turn on/off;
3. Go to the watch settings >> [DND] >> turn on the DND mode >> set start/end time. The watch will turn on DND mode at a fixed time within the set period;
4. Go to the watch settings >> [DND] >> sleep do not disturb. The watch turns on Do Not Disturb mode after detecting sleep and turns on Do Not Disturb mode at a fixed time within the set period.

6. Q: What are the options for turning off the screen of the Redmi Watch 5 Lite? How to set it?

1. By default, if the watch does not operate within 5 seconds, the screen will automatically turn off. You can modify the rest screen time in the watch settings. Setting method: open the watch settings >> [Display and brightness] >> [Auto lock] >> select the rest screen time;
2. The watch supports covering to rest screen. After opening, cover and contact the watch face with the palm of your hand. When the area reaches 1/2 of the watch face, the watch face directly changes from a bright screen to a rest screen. Setting method: open the watch settings >> [Display and brightness] >> [Cover to sleep];
3. Lower/turn the wrist to rest the screen, and reverse the wrist to wake up the screen. (After enabling the Raise to wake function, lower/turn the wrist can rest the screen).

7. Q: How to set up the Raise to wake function of the Redmi Watch 5 Lite?

8. Q: How to adjust the screen brightness of the Redmi Watch 5 Lite?

9. Q: Can the Redmi Watch 5 Lite add time zones?

10. Q: How to set the standing reminder function of the Redmi Watch 5 Lite?

11. Q: What is the logic of the Redmi Watch 5 Lite’s standing reminder?

1. A standing reminder is turned on;
2. The 50th minute of the current hour;
3. You didn’t stand in the current hour;
4. In the first 50 minutes of this hour, the unworn state time is <5 minutes, and the sleep state time is <5 minutes;
5. The current time point is within the reminder time range set by you.

12. Q: Does the Redmi Watch 5 Lite support the PIN function?

13. Q: Does the Redmi Watch 5 Lite support Bluetooth unlocking mobile phones?

1. Open the Mi Fitness App and tap [Unlock phone];
2. If you have set the lock screen password, you do not need to operate this step. If there is no lock screen password, you need to set a password, and return to the previous interface in the Mi Fitness App after setting it;
3. Confirm on your wearable device;
4. Verify password;
5. Complete device security verification;
6. Setup complete.

14. Q: Does the Redmi Watch 5 Lite support a WLAN connection and how to use it?

15. Q: Does the Redmi Watch 5 Lite support connecting to Bluetooth headphones and how to use it?

16. Q: Does the Redmi Watch 5 Lite support switching application layout and how to set it?

17. Q: How to turn on the silent mode of the Redmi Watch 5 Lite? After turning on silent mode, which sounds are turned off?

1. Open watch settings >> [Sound and vibration] >> turn on the silent mode switch;
2. Slide up on the watch to open the control center and tap the silent mode icon;
3. Open watch settings >> [Sound and vibration] >> manually adjust the ringtone volume to 0.

18. Q: Does the Redmi Watch 5 Lite support custom ringtones?

19. Q: What is the drainage function of the Redmi Watch 5 Lite?

20. Q: How to check the MAC address, serial number and other information of the Redmi Watch 5 Lite?

1. Open the watch settings >> [About watch];
2. When the watch is connected to the mobile phone, open the Mi Fitness App >> [Device] >> [About Device].

21. Q: Does the Redmi Watch 5 Lite support power saving mode (ultra-long endurance mode)?

22. Q: How to set the time of the Redmi Watch 5 Lite?

23. Q: How to check the Bluetooth connection status of the Redmi Watch 5 Lite?

24. Q: Does the Redmi Watch 5 Lite support adjust the vibration strength?

25. Q: Can someone search for the Redmi Watch 5 Lite if it's not nearby?

26. Q: What data will be cleared after the Redmi Watch 5 Lite is restored to the factory settings?

27. Q: Does the Redmi Watch 5 Lite support modifying other languages?

28. Q: Why can't the icon of Do Not Disturb mode on the Redmi Watch 5 Lite be eliminated at night? Why can't receive message notifications only at night? How to use the sleep mode function on the Mi Fitness App?

29. Q: Why slide right on the watch face of the Redmi Watch 5 Lite cannot recognize?

30. Q: When the mobile phone is connected to the Redmi Watch 5 Lite and the Bluetooth headset at the same time, why not use the Bluetooth headset as the default calling device when making a phone call?

Sports Related

1.Q: How to measure and view heart rate on the Redmi Watch 5 Lite?

1. After the watch turns on the continuous heart rate monitoring, enter the application list to open the heart rate application, or slide left or right on the watch face to view the heart rate widget, which can view the real-time heart rate, and some watch faces can also display data such as heart rate in real time;
2. If the watch turns off the continuous heart rate monitoring, enter the application list to open the heart rate application, or slide left or right on the watch face to enter the heart rate application through the heart rate widget, and the watch automatically performs real-time heart rate measurement. After the measurement is completed, you can choose to quit or re-measure.

2.Q: What is the resting heart rate of the Redmi Watch 5 Lite?

3.Q: What is the heart rate range of the Redmi Watch 5 Lite?

1. The heart rate interval refers to the heartbeat range per minute and is calculated based on the percentage of the maximum heart rate value;
2. The maximum heart rate value of the watch is automatically calculated, and it can also be set in the Mi Fitness App. The setting method: Mi Fitness App >> [Profile] >> tap your Xiaomi Account >> [Max heart rate] >> turn off [Auto detect] >> set the maximum heart rate value.

4.Q: What factors affect the heart rate measure results of smartwatches?

1. Non-standard wearing methods, such as light leakage caused by incomplete fit, arm swing and slight movement of the watch on the skin, etc. Too tight wearing of the watch, arm elevation and fist clenching will affect blood circulation and will also affect heart rate signals;
2. The watch is worn near the joint;
3. There are many sweat stains on the watch. Correct measurement method: Keep your arm flat, relaxed, and still, ensuring the watch is snug against your arm;
4. Due to the characteristics of the PPG chip, blood oxygen (red light) and heart rate (green light) cannot be turned on at the same time, that is, blood oxygen and heart rate cannot be measured at the same time. If the blood oxygen measurement is continuous for a long time, there will be no background heart rate monitoring data for this period of time.

5. Q: What to do if the Redmi Watch 5 Lite displays a heart rate that is too high?

6. Q: Does the Redmi Watch 5 Lite display heart rate when not worn?

1. Some watch faces that support the display of the heart rate data will display the "-" icon for heart rate when the watch is not worn;
2. In some cases (e.g. real-time heart rate detection is triggered during exercise), due to the heart rate judgment mechanism, the watch will display heart rate when placed on some dark surfaces.

7. Q: How does the Redmi Watch 5 Lite measure and display the blood oxygen saturation?

8. Q: Does the Redmi Watch 5 Lite support sleep monitoring?

3. You can slide left or right on the watch face to enter the sleep widget to view the sleep data from last night. Tap to enter the application to view more information;
4. Tap the sleep icon in the application list to view the sleep data of the day;
5. After the watch is connected to the mobile phone to synchronize the data, tap the [Sleep] section in the home interface of the Mi Fitness App to view historical sleep data, including day, week, month, and year. You can also view the daily sleep period, the proportion of deep sleep, light sleep, rapid eye movement, and awake sleep, as well as detailed sleep status at each time point.

1. There is a delay in the generation of sleep reports. If the sleep function is turned on immediately after waking up, there will be no sleep report for the time being;
2. The watch only retains the sleep data of last night. Please synchronize the data to the Mi Fitness App in time to avoid the loss of data.

9. Q: How to use the Breath training feature on the Redmi Watch 5 Lite?

1. Open the breath training application and you can choose 1-5 minutes and the Appropriate speed for breath training according to your needs;
2. Please keep your wrist stable and follow the breathing animation on the watch screen to take deep breaths;
3. After the breath training, you can see the comparison of your heart rate before and after the breath training.

10. Q: Does the Redmi Watch 5 Lite support stress monitoring?

1. After wearing the watch normally, open the stress application on the watch to view the stress data;
2. In the [Stress] section of the Mi Fitness App, you can check the stress curve of day, week, month and year, the maximum, minimum, average stress and other information, and do some decompression activities to relieve pressure through analyzing the data.

1. Stress data is dependent on the heart rate data. When continuous heart rate monitoring is turned off, stress data will not be displayed normally. Please ensure correct wearing and turn on the continuous heart rate monitoring;
2. When strenuous exercise or moderate and high intensity activities are frequent, the accuracy of stress data evaluation will be affected to some extent;
3. The Redmi Watch 5 Lite is not a medical Apparatus. The measure results and suggestions are for reference only.

11. Q: How to activate sports mode on the Redmi Watch 5 Lite?

1. Open the Workout application or widgets, select the desired sport, and tap [GO] to start;
2. After the sport starts, the watch will display the exercise data;
3. During the exercise, you can pause or end the exercise by pressing the power button.

1. If the exercise time or distance is too short, the watch will prompt you that the workout distance/time is too short to record;
2. Sports such as running need to wait for the watch to successfully obtain the location of the mobile phone before turning it on, otherwise, the movement track will be abnormal.

12. Q: Does the Redmi Watch 5 Lite support maximum oxygen uptake (VO₂ max)?

13. Q: What sports modes are available on the Redmi Watch 5 Lite?

14. Q: What data does the Redmi Watch 5 Lite display during exercise?

15. Q: How to set goals during exercise on the Redmi Watch 5 Lite?

1. Target time: The default is 10 minutes, and the adjustment unit is 1 minute. It can be set according to your situation;
2. Target distance: The default value of the running class is 5.0 kilometers, and the adjustment unit is 0.1 kilometers. The default value of the riding class is 10 kilometers, and the adjustment unit is 1 kilometer. It can be set according to your situation;
3. Target calories: The default is 300kcal, and the adjustment unit is 50kcal, which can be set according to your situation;
4. Target number: 1000 by default and 100 by adjustment unit, which can be set according to your situation;
5. Target times: The default is 200 times, and the adjustment unit is 10 times. It can be set according to your situation;
6. Target number of trips: The default is 8 trips, and the adjustment unit is 1 trip, which can be set according to your situation.

16. Q: How to view sports records on the Redmi Watch 5 Lite?

1. View detailed movement data in the watch's Activity application;
2. After the watch is connected to the mobile phone, tap [Health] in the Mi Fitness App, and tap [Show all] under the workout section, then you can view the sports record by week, month, and year. In addition to the sports information on the watch, you can also view the sports track and other information.

17. Q: How to check daily steps, calories, and effective standing on the Redmi Watch 5 Lite?

3. Widgets: slide left or right on the watch face to view the current calorie, number of steps and effective standing data on the corresponding widget;
4. application list: Press the power button to enter the application list, and tap the [Stats] application icon to view it;
5. Mi Fitness App: When the mobile phone is connected to the watch, open the Mi Fitness App and view it in the [Health] interface.

18. Q: Does the Redmi Watch 5 Lite support voice broadcasting during sports?

19. Q: How to set up women's health management notification on the Redmi Watch 5 Lite?

20. Q: Does the Redmi Watch 5 Lite support energy monitoring?

21. Q: How is effective standing judged on the Redmi Watch 5 Lite?

22. Q: Does the Redmi Watch 5 Lite support sports reminders?

23. Q: How long can the Redmi Watch 5 Lite store data independently?

1. All sports will not be saved until they meet the minimum sports record standard, otherwise, they will not be saved;
2. Sports data like indoor cycling, free training, etc. will be saved to the sports record after reaching 1 minute;
3. Outdoor running, indoor running, outdoor walking, outdoor riding, mountaineering, cross-country, and the exercise distance of more than 100 meters are counted as valid data and will be saved to the exercise record.

24. Q: Why does the Redmi Watch 5 Lite display that the storage space is full and end workouts?

25. Q: How to delete sports data on the Redmi Watch 5 Lite?

26. Q: Can the Redmi Watch 5 Lite set automatic pause during exercise?

27. Q: Why does the GPS data update take a long time on the Redmi Watch 5 Lite?

Other applications

1. Q: How to view the weather information on the Redmi Watch 5 Lite?

1. Through the Weather application: Press the power button to enter the application list, select the Weather App from the list, and view details such as local temperature, weather conditions, wind level, UV intensity, relative humidity, sunrise and sunset times, and future weather forecasts. Slide up or down to view the information;
2. Weather widget: Slide left or right on the watch face to access the weather widget, which provides temperature and weather condition information. Tap the widget to enter the Weather App for more details.

1. If you use your watch to view the real-time weather, you need to keep your phone connected to your watch. The weather synchronization function of the Mi Fitness App needs to be turned on. If your watch is not connected to your phone, it will display the last synchronized weather information;
2. If the Weather widget is hidden in the Mi Fitness App, you won't be able to view it through the widget on the watch;
3. The weather information is synced from the Mi Fitness App and will differ from the mobile phone’s weather provider;
4. The Mi Fitness App allows you to manually add up to 5 cities.

2. Q: Does the Redmi Watch 5 Lite support the function of finding a mobile phone or a watch?

1. Enter the Find phone application in the application list and tap [Search];
2. During the searching process, tap [Stop] to end the searching state.

1. Open the [Mi Fitness] App >> [Device] >> [Find device];
2. During the search process, tap [Stop] to end the search state.

3. Q: Does the Redmi Watch 5 Lite support the compass function?

4.Q: Does the Redmi Watch 5 Lite support viewing the pressure and elevation?

5. Q: How to turn off the alarm vibration and ringing on the Redmi Watch 5 Lite?

1. Turn off the alarm vibration: Go to the watch settings >> [Sound and vibration] >> select the vibration mode;
2. Turn off the alarm ringing: Go to the watch settings >> [Sound and vibration] >> set the alarm volume to 0.

6. Q: How to use emergency contacts on the Redmi Watch 5 Lite?

1. Set the emergency contact: In the Mi Fitness App, go to [Device] >> [Emergency SOS] >> enable [Emergency contacts]. Put in the phone number and name. Confirm your changes by tApping the confirmation icon;
2. Call emergency contact: Ensure the watch can make Bluetooth calls normally. Press the power button three times to dial the emergency contact directly (ensure the watch is connected to the phone and the emergency contact is enabled and set).

7. Q: How to answer and make calls with the Redmi Watch 5 Lite?

1. Answer calls: When a call comes in, the watch will prompt you. Tap the answer or hang-up icon on the watch to accept or reject the call (mobile phone synchronizes operation). When answering with a mobile phone, you can select the watch as the audio device or use it to make calls;
2. Make calls: Tap on the call record or missed call notifications on the watch to initiate a call (mobile phone synchronizes operation).

8. Q: How to take photos with the Redmi Watch 5 Lite?

9. Q: Can the Redmi Watch 5 Lite control music playback on the mobile phone?

10. Q: Why can't some music applications be controlled properly by the Redmi Watch 5 Lite?

Troubleshooting

1.Q: Why is the data of the Redmi Watch 5 Lite inaccurate?

1. Because the principle of measuring the walking distance of a watch is to estimate your step length according to the height, sex and weight set by yourself, and then multiply it by the number of steps taken by you to obtain an estimated value;
2. Because the mileage varies, and people of the same height, sex and weight also have different steps, the final calculated value will also have large errors;
3. The accuracy of step counting, that is, the number of steps taken, also has many uncertain factors that will have a great relationship with everyone's behavior habits, such as the amplitude of arm waving, walking habits, etc. There are many scenes of human activities (such as walking, riding, driving, bathing, etc.), and arm movements are more complicated (such as keyboard tApping, moving mouse, lifting and pulling objects, etc.);
4. It is because of the above reasons that the final calculated distance of the watch is also an estimated value. The watch cannot be used as a professional measurement tool to measure the distance. We will continue to optimize the software algorithm to calculate more accurate data.

2.Q: Why is the GNSS positioning sometimes slow on the Redmi Watch 5 Lite?

3.Q: Why is there sometimes no movement track or track loss on the Redmi Watch 5 Lite after movement?

4.Q: Why does the trajectory drift on the Redmi Watch 5 Lite?

5.Q: Why doesn’t the Redmi Watch 5 Lite generate exercise data?

1. Please confirm whether the watch is normally worn and whether the heart rate is normal;
2. After the exercise is started, ensure whether the exercise time or distance reaches the minimum standard of exercise recording;
3. It is caused by improper wearing and abnormal heart rate monitoring.

6.Q: What to do if the Redmi Watch 5 Lite cannot be charged?

1. Charge with a regular standard adapter;
2. Check whether there is any foreign object in the contact points;
3. Remove the watch from the charging cable and put it back again, unplug and plug the USB adapter, and try to replace the socket;
4. Forcibly restart the watch and then put it back to the charging cable for charging.

7.Q: Why does the Redmi Watch 5 Lite show heart rate when worn on other objects?

8.Q: What to do if the data synchronization between the mobile phone and the Redmi Watch 5 Lite fails?

1. Refresh the interface in the Mi Fitness App and reconnect;
2. Turn off the Bluetooth of the mobile phone and turn it on again. Re-connect to the Mi Fitness App;
3. Restart the watch, restart the phone, and try to reinstall the Mi Fitness App to check if the problem is solved.

9.Q: What to do if the Redmi Watch 5 Lite doesn't vibrate?

1. First check whether the watch disables the vibration in the watch settings >> [Sound and vibration];
2. Whether the watch enables the DND mode;
3. If the vibration is turned on and the DND mode is not turned on, you can restart the watch and inspect the functions such as stopwatch or alarm to check if the watch’s functions are normal. If the watch still does not vibrate, you can contact the after-sales service center for further assistance.

10.Q: What to do if the Redmi Watch 5 Lite crashes, has a black screen, or cannot boot?

1. Connect the device to the charging cable, and continue charging for more than 10 minutes;
2. If the wearable device cannot be turned on after charging, you can try to force it to restart. Press the power button for more than 12 seconds to force restart;
3. If the device still cannot be turned on, please contact the after-sales service center for inspection.

11.Q: What to do if the system upgrade of the Redmi Watch 5 Lite fails?

1. If the Mi Fitness App or wearable device prompts that the upgrade fails, please try to restart the wearable device and upgrade again;
2. Charge the watch until the watch's power is more than 20% and upgrade it again;
3. Reset the watch and try to upgrade after re-pairing;
4. Try to replace to other mobile phones, rebind and upgrade;
5. If the device cannot be turned on after the upgrade fails, please contact the after-sales service center for processing.

12.Q: What to do if the interface of the Redmi Watch 5 Lite cannot change after the system upgrade process is 100%?

13.Q: How to deal with the time error of the Redmi Watch 5 Lite?

14.Q: What to do if the Redmi Watch 5 Lite cannot be bound?

1. Exit the Mi Fitness App and turn off the Bluetooth switch to reopen the binding attempt;
2. If the watch cannot be found on the Mi Fitness App, you can put your watch close to your mobile phone or go to a place with fewer Bluetooth devices to search and add it again;
3. If it is still not searched, check whether there is the watch information in the Bluetooth settings of the mobile phone, clear the Bluetooth pairing information of the watch, and then enter the Mi Fitness App to re-add the device.

4. Try to restart the watch or mobile phone and reset the watch to check if the issue persists.

15.Q: What to do if the weather in the Redmi Watch 5 Lite is not updated?

1. Please open the Mi Fitness App and check whether the watch and the mobile phone are disconnected from Bluetooth;
2. Please check whether the weather synchronization is turned on in the Mi Fitness App >> [Device] >> [Weather].

16.Q: What to do if the application notification of the Redmi Watch 5 Lite does not remind?

1. Check whether the connection state between the watch and the mobile phone is normal, and confirm that the mobile phone has been paired and is in the Bluetooth connection state;
2. Check whether the watch has turned on the Do Not Disturb mode;
3. Check whether the notification permission of the Mi Fitness App is allowed. Take a Xiaomi smartphone with the Xiaomi HyperOS system as an example, you need to open the permission: [Settings] >> [Apps] >> [Permissions] >> [Permissions] >> [Notifications] >> turn off and turn back on the switch of the Mi Fitness App;
4. Check that the current application information can be correctly displayed in the notification shade of the mobile phone. If it is not displayed, please turn on the notification management authority on the mobile phone of this application. Take a Xiaomi smartphone with the Xiaomi HyperOS system as an example: [Settings] >> [Notifications & Status bar] >> [App notifications] >> turn on the switch of the Mi Fitness App;
5. Check whether the notification function of the watch is turned on in the Mi Fitness App. The setting method: Mi Fitness App >> [App notifications];
6. Restart and reset the watch and bind it again.

1. [Settings] >> [Bluetooth] >> tap the exclamation icon beside the device >> turn on [Share System Notifications];
2. [Settings] >> [Notifications] >> [Show Previews] >> change to [Always];
3. [Settings] >> [Notifications] >> select the specific application >> turn on all switches >> change the [Show Previews] option to [Always].

17.Q: Why does the Redmi Watch 5 Lite only vibrate without a bright screen when there is a new message reminder?

18.Q: Why is the number of steps of the Redmi Watch 5 Lite different from that in the Mi Fitness App?

1. It is due to the disconnection between the watch and the App, and the number of steps is not synchronized in time. The Mi Fitness App can be synchronized after being refreshed again;
2. In addition, when the current wearable device synchronizes data with the Mi Fitness App, the device will discard the data value transmitted by the App when it is less than the local value of the device (the device data is not covered), and when it is greater than the local data of the device, the transmitted data is used. Synchronize to the local, and continue to accumulate after the current hour is synchronized (there will be a 30-minute delay in data synchronization), which is also one of the possible reasons for this phenomenon.

19.Q: What to do if the Redmi Watch 5 Lite is successfully bound but cannot be connected?

1. First of all, ensure that the watch has sufficient power;
2. Check the connection status of the Mi Fitness App. If it is disconnected, tap the connection icon to restore the connection;
3. End the connection process of the Mi Fitness App, restart the Bluetooth of the mobile phone, restart the mobile phone or watch, and try to refresh the connection state in the App;
4. Please try to restore the watch to the factory settings, and then tap the connection icon in the App. When the same pairing code Appears on the watch and App interface, please match them to pair;
5. If it still cannot be solved, please clear the Bluetooth pairing history with the watch in the Bluetooth settings in the mobile phone, restore the factory settings of the watch, and then restart the binding process.

20.Q: Why is the weather of the Redmi Watch 5 Lite inconsistent with the weather of the mobile phone?

21.Q: Why doesn’t the Redmi Watch 5 Lite count the steps when you have already started walking?

22.Q: What to do if the heart rate, blood oxygen, sleep, or pressure of the Redmi Watch 5 Lite is not valued?

23.Q: How long does it take to upgrade the system of the Redmi Watch 5 Lite?

24.Q: Why are there slow download and installation of some watch faces of the Redmi Watch 5 Lite?

25.Q: Why is the screen of the Redmi Watch 5 Lite showing abnormalities (black and white stripes, blurry screen, touching failure, etc.)?

26.Q: Why does the Redmi Watch 5 Lite restart automatically?

27.Q: Why does the Redmi Watch 5 Lite encounter unsmooth situations?

28.Q: After the Redmi Watch 5 Lite has not been used for a long time, why the charging is relatively slow and the battery power continuously shows 0%?

29.Q: What to do if the Redmi Watch 5 Lite has a touch failure problem?

30.Q: Why can't some watch faces be found on the Redmi Watch 5 Lite?

31.Q: What to do if the Redmi Watch 5 Lite stops charging?

32.Q: Why does the Redmi Watch 5 Lite have 2 Bluetooth names in the Bluetooth list after binding?

33. Q: Why cannot the Redmi Watch 5 Lite be paired after tApping [Connect new phone]?

34. Q: Why cannot the iOS phone connect to the Redmi Watch 5 Lite after turning off the Bluetooth and turning it on again?

35. Q: What are the solutions to the problem of touch insensitivity of the Redmi Watch 5 Lite?

1. If the device is turned on the Cover to sleep function, you can try to cover the screen and light the screen again to see if it is normal;
2. Press the power button for more than 12s to check if the forced restart is normal;
3. Verify the firmware version, update to the latest version and try again;
4. If the above steps are not resolved, please contact the after-sales service center for a return or replacement.

36. Q: Why is the QR code displayed on the Redmi Watch 5 Lite blurry?

37. Q: How long does it take to update the calendar data of the Redmi Watch 5 Lite?

Warning List

1.Q: What to do if the Redmi Watch 5 Lite back cover surface has scratches or bruises?

2.Q: Why does the Redmi Watch 5 Lite have the color difference problem of the middle frame and the power button?

3.Q: What to do if the contact points of the Redmi Watch 5 Lite are dirty, leading to ineffective charging?

4.Q: What to do if the screen of the Redmi Watch 5 Lite is scratched or damaged?

1. The screen cover is a glass cover. Metals, sand and other sharp objects in daily life will cause scratches on its surface. Such use scenarios should be avoided as much as possible;
2. If the front of the screen is hit by a heavy impact, there is a possibility of breaking the screen. Avoid falling, heavy pressure, collision and other scenes of daily use.

5.Q: Why is the screen surface of the Redmi Watch 5 Lite unclean or lacks coating?

6.Q: Why does the middle frame of the Redmi Watch 5 Lite have discoloration?

7.Q: Why does the paint of the Redmi Watch 5 Lite have scratches or drop?

8.Q: What to do if the strap of the Redmi Watch 5 Lite is not fully assembled and falls off?

9.Q: How to achieve a better wearing experience of the Redmi Watch 5 Lite strap?

10.Q: What to do if there is no data feedback of the heart rate on the Redmi Watch 5 Lite?

11.Q: What to do if the sound of the Redmi Watch 5 Lite is low and noisy after touching water?

12.Q: What to do if put the Redmi Watch 5 Lite into the milk, Coke, Sprite, etc., resulting in low sound and silent phenomenon?

13.Q: What to do if the speaker and the MIC hole of the Redmi Watch 5 Lite are blocked resulting in silent or low sound?

14.Q: What to do if the lens of the heart rate sensor on the Redmi Watch 5 Lite is cracked?

15.Q: Why cannot download the Mi Fitness App after scanning the QR code on the Redmi Watch 5 Lite?

1. Make sure the mobile phone’s network is normal;
2. Try to use other applications to scan the QR code;
3. Go to the Play Store to download the latest version of the App.

16.Q: What to do if the QR code on the Redmi Watch 5 Lite is not recognized?

1. Make sure to select the correct region;
2. Make sure the watch screen is clean and free of dirt;
3. Make sure the mobile phone’s camera can focus on the object.

17.Q: What to do if the binding time of the Redmi Watch 5 Lite and the mobile phone is long?

1. Re-switch the Bluetooth to connect again;
2. Restart the watch to connect again.

18.Q: How to sync data after binding the Redmi Watch 5 Lite?

1. Automatic synchronization:

2. Manual synchronization:

19.Q: What to do if the mobile phone and the Redmi Watch 5 Lite watch cannot connect?

1. Please try to turn off the Bluetooth switch of the mobile phone and then turn it back on;
2. Restart the watch;
3. After the watch restarts, try to connect the watch again to the App.

20.Q: What to do if the Redmi Watch 5 Lite does not connect back after disconnecting the Bluetooth of the phone?

1. Make sure that the mobile phone’s network is normal, and the Bluetooth switch of the mobile phone is on;
2. Please try to re-switch the Bluetooth of the mobile phone or restart the watch to connect again;
3. Make sure that the distance between the mobile phone and the watch is within 20 meters.

21.Q: What to do if the heart rate sensor of the Redmi Watch 5 Lite doesn’t work?

1. Please wear the watch about one finger away from the wrist bone. Wearing it too loosely will affect the accuracy of the monitored heart rate;
2. Please ensure that the heart rate sensor at the bottom of the watch is in direct contact with the skin, and there is no dirty obstructing the heart rate sensor.

22.Q: What to do if the sleep data of the Redmi Watch 5 Lite is inaccurate?

1. Sleep data is not recorded. If the wrist movements are more or very unstable, the watch will mistake it as non-sleep, resulting in non-recording of sleep;
2. If the sleep time is less than 15 minutes, the watch will not monitor the sleep, and sleep data will not be recorded at this time;
3. Sleeping on subways, high-speed trains, buses and other transportation vehicles will not be recorded due to the shaking or acceleration of the transportation vehicles;
4. Too loose wearing will lead to abnormal sleep monitoring. It is recommended to ensure that the watch is positive when wearing. Wear it a little behind the wrist bone, and do not press the device on the wrist bone. Adjust the strap to ensure that it fits the skin to wear. Avoid wearing too loose or too tight, resulting in inaccurate sleep data detection;
5. The watch is in a relatively quiet state, and there is a movement range similar to sleep, which makes the device misjudge it as a sleep state, resulting in a false increase in sleep duration. For example, when you watch TV, play with your mobile phone, or read a book in a lying position before going to bed, you will be mistaken as asleep. The principle of sleep is to monitor sleep through the principle of heart rate variability. The heart rate sensor monitors changes in light. Therefore, when the light changes received by the device sensor are similar to those of the wrist, it will be determined that the watch is worn, and sleep monitoring will be carried out, resulting in sleep data and sleep time differences from actual sleep;
6. The device cannot display the sleep of the previous day. The standard range of sleep data of the day is the data from 00:00 of the previous day to 24:00 of the same day. The sleep wake-up time of the day is attributed to the same day from 00:00 to 24:00. The watch only shows the sleep fragments of the day. If you have a sleep before 00:00, you can check it in the App.

23.Q: What to do if the blood oxygen saturation measurement of the Redmi Watch 5 Lite is slow or doesn’t work?

1. Factors such as hair, tattoos, shaking, low temperature, and incorrect wearing will affect the measurement results, and even lead to value failure. Wear the device tightly to the distance from one finger of the wrist bone, and keep it stationary throughout the measurement, which can greatly improve the successful rate of the measurement;
2. In order to ensure the accuracy of the measurement, please wear the watch correctly, keep the arm flat, keep the watch screen upward, and the watch and wrist skin are comfortably attached. Do not wear it on the wrist joint, and then start the blood oxygen saturation measurement on the watch. Keep the arm stationary throughout the measurement;
3. Ensure that the sensor on the back of the watch is clean and dry, and there is no foreign objects occlusion;
4. In a low temperature environment (such as high altitude, winter and other low temperature scenes), you can remove the watch and rub the sensor of the watch actively with the skin to increase the blood circulation, therefore improve the measurement;
5. In order to make the measurement result more accurate, it is recommended that you wear it for 3-5 minutes before measuring the blood oxygen saturation.

24.Q: What to do if the music playback control state of the Redmi Watch 5 Lite is not synchronized with the phone?

1. The watch and the mobile phone are always connected, and the App needs to keep running in the background;
2. Android phones need to be confirmed that the App has enabled corresponding permissions.

25.Q: What to do if lifting the wrist doesn’t light the screen of the Redmi Watch 5 Lite?

1. Check whether the Raise to wake function has been turned on. Go to watch’s settings >> [Display] >> [Raise to wake]. If the timing is selected and the effective period is set, the watch will only enable the Raise to wake function during the effective period;
2. If turning on the sleep mode or battery saver mode, the Raise to wake function will not be turned on.

26.Q: What to do if the Raise to wake function of the Redmi Watch 5 Lite is not sensitive?

1. It is recommended that you put the watch face up, avoid wearing it on the wrist bone, and wear it tightly. In the back position of the wrist bone, ensure that the device will not slide;
2. Please tilt the watch inward 30-90 degrees when you lift your wrist, and within 1 second, then you can light up the screen;
3. Please try to stay on the screen toward your face when lifting your wrist or turning your wrist.

27.Q: What to do if the Redmi Watch 5 Lite is not sensitive to touch and stroke?

28.Q: What to do if touching the screen of the Redmi Watch 5 Lite is not responsive?

1. Please connect the charging cable to check whether the device can be charged;
2. If your watch’s screen is dirty or has water stains, it will affect the touch sensitivity of the screen. It is recommended that you wipe the screen clean and try;
3. Check whether it is normal to turn off and restart.

29.Q: What to do if the screen of the Redmi Watch 5 Lite cannot be lit?

1. Please connect the charging cable to check whether the device has electricity power;
2. Check whether it has been turned on;
3. Check whether the charging can be activated.

30.Q: What to do if the firmware upgrade of the Redmi Watch 5 Lite fails?

1. The network is disconnected during the download of the upgrade package by the App, which causes the download of the upgrade package to fail;
2. When the App pushes the upgrade package to the watch, the distance between the watch and the mobile phone is too far, which causes the transmission to be interrupted;
3. The power of the watch is too low and the watch automatically shuts down during the upgrade process. After the watch fails to upgrade, it will automatically restart. After it is turned on, the watch can still be used, but the version before the upgrade is maintained. You can try the upgrade again after ensuring that the watch has sufficient power and the download of the upgrade package is completed.

31.Q: What to do if the Redmi Watch 5 Lite cannot remotely control the mobile phone to take pictures?

1. Check whether the watch and the Bluetooth of the phone are connected;
2. If it is already in the pairing state, please check whether the mobile phone’s Bluetooth has been connected to seven Bluetooth devices. If seven Bluetooth devices have been connected, please disconnect some devices and try again.

32.Q: What to do if the weather data on the Redmi Watch 5 Lite is not updated?

1. Open the Mi Fitness App, check whether the watch and the mobile phone are disconnected from the Bluetooth connection on the Device interface;
2. In the App, tap [Device] >> [Weather], and check whether [Weather updates] is turned on. If it is turned on, please turn off [Weather updates] and turn it back on. Check whether the system location-based service and App location permissions are turned on. In the App, tap [Device], tap the [Sync] icon on the right side of the watch, and manually synchronize the data.

33.Q: What to do if the Redmi Watch 5 Lite loses its sports record?

34.Q: What to do if the Redmi Watch 5 Lite's unread notifications are lost?

35.Q: What to do if the calorie calculation or the blood oxygen measurement on the Redmi Watch 5 Lite is not accurate?

1. The watch is not worn correctly. The heart rate sensing area on the back of the device does not fit the wrist skin, and data cannot be obtained;
2. The heart rate sensing area on the back of the watch is dirty, or there is sweat between the wrist and the device, which will affect the measurement results;
3. The wrist is not kept still during the measurement and the arm is shaken;
4. If the temperature of the environment or the wrist skin is low and the blood flow decreases, measurement results will be affected;
5. The wrist wearing the watch is in a state of compression, which affects blood circulation and also causes the measurement results to be inaccurate;
6. Tattoos or pigmentation on the wrist will affect the penetration of red light from the sensor, resulting in inaccurate measurement results.

36. Q: What to do if sliding the screen of the Redmi Watch 5 Lite is not smooth?

1. If the current setting is in the process of connecting back, it is recommended to wait for the connection to be successful, or try again after the connection is completely disconnected;
2. If the current device is synchronizing data with the App, it is recommended to try again after the data is synchronized;
3. Try again after restarting the watch.

37. Q: What to do if the Redmi Watch 5 Lite’s alarm and mobile phone’s alarm are not synchronized?

1. It only supports synchronization MIUI mobile phone’s alarm to the device reminder. You need to open the mobile phone’s alarm reminder switch in the Mi Fitness App >> [Device] >> [Alarm]. When the phone has an alarm, the watch and the phone need to be Bluetooth connection state, and keep the App running in the background;
2. It does not support the alarm set in the watch to remind on the phone side.

38. Q: What to do if the Redmi Watch 5 Lite cannot receive messages?

1. Please make sure that in the mobile phone, the new message reminder is turned on, and ensure that the message content can be successfully displayed in the mobile phone’s notification shade;
2. The message notification switch is not turned on in the App. Solution: Tap [App notifications] in the App and enable this feature;
3. The Do Not Disturb mode is turned on on the watch, and within the period of the Do Not Disturb mode, the watch will not vibrate after receiving new messages. Turn off the Do Not Disturb mode on the watch, or modify the time period when the Do Not Disturb mode is effective;
4. For Android phones, the watch is disconnected from the mobile phone. Please ensure that the mobile phone's network connection is good, Bluetooth remains open, and the connection with the watch is normal. You can check the connection status in the device interface of the App;
5. The App is turned off in the background of the phone. Add the Mi Fitness App to the background of the phone;
6. For iOS phones, if you find that you have not received the reminder, please check one by one whether the following permissions are turned on: Turn on the application notification permission in the phone settings. Turn on the application permission that allows the message notifications displayed in your phone’s notifications, so that it can be synchronized to the device. Open the [Settings] >> [Notifications] >> [Show Previews] >> change to [Always], and modify the notification style in the mobile phone settings. Open the [Settings] >> [Notifications] >> select the specific application >> turn on all switches >> change the [Show Previews] option to [Always]. Open the [Settings] >> [Bluetooth] >> tap the exclamation icon beside the device >> turn on [Share System Notifications] (If there is no shared system notification option, there is no need to set it).

39. Q: What to do if the Redmi Watch 5 Lite watch cannot synchronize with the mobile phone’s schedule?

1. Schedule synchronization only supports MIUI calendar and iOS calendar;
2. Supported models need to turn on the Sync events switch in the App and allow relevant permissions;
3. It only synchronizes the schedule for the next seven days.

40. Q: What to do if the Redmi Watch 5 Lite is not fully charged or the charging icon flashes?

41. Q: Why does the packaging label of the Redmi Watch 5 Lite have black squares?

42. Q: What to do if the package of the Redmi Watch 5 Lite is fluffy and wrinkled?

43. Q: Why is the QR code interface of the Redmi Watch 5 Lite splashing?

44. Q: How to troubleshoot the Bluetooth connection failures of the Redmi Watch 5 Lite?

1. Enter the Bluetooth interface of the mobile phone to check whether the Bluetooth address of the current watch has been connected. If it has been connected, you need to forget the Bluetooth before trying to connect;
2. Check the Bluetooth connection distance between the wearable device and the mobile phone. Long distance will cause the Bluetooth to automatically disconnect;
3. Use the latest version of the Mi Fitness App;
4. The watch resumes the factory settings;
5. Open the Bluetooth settings of the mobile device to check whether the watch’s Bluetooth address can be found;
6. Check the operating system and supplier of your mobile phone, check the App usage scenarios, and update the App version;
7. Verify the firmware version, update to the latest version and retry.

1. Check whether the device opens the relevant permissions;
2. Slide into the control center on the watch to check whether the DND mode is turned on. If the DND mode is turned on, incoming calls and application notifications will not be reminded;
3. Verify the firmware version, update to the latest version and try again.

45. Q: Why does the battery life of the Redmi Watch 5 Lite is short?

1. First, reduce the brightness of the watch. Under the condition of sufficient light, the screen brightness of the watch can be Appropriately reduced to save electricity;

2. Second, in the App, enter the device interface and reduce the monitoring frequency of some health functions, which can effectively save electricity. Select low-frequency heart rate monitoring. The higher the frequency of heart rate monitoring, the more detailed the data, and the faster the power consumption of the device at the same time. In the heart rate settings, select low-frequency heart rate monitoring to save electricity;

46. Q: What to do if the Redmi Watch 5 Lite can’t be charged?

1. Check whether the watch can be turned on. In the power-on state, replace the charging cable to confirm whether the charging cable is damaged and does not charge;
2. Wipe the contact points of the watch to avoid sweat or moisture residue. Check whether the contact points are damaged or collapsed;
3. Check whether the contact points on the back of the watch are completely attached to the charging cable;
4. If the watch cannot be turned on after a long time of storage, it needs to be pre-charged for about 3 minutes before the charging icon is displayed;
5. Verify the firmware version, update to the latest version and try again.

47. Q: How to solve the common problem of not turning on the Redmi Watch 5 Lite?

1. Place the device to the charging cable and keep charging for more than 5 minutes to check whether the watch is turned on;
2. When the watch cannot be turned on after 5 minutes of charging, you can try to press the power button for more than 12 seconds to force the watch to restart. If the forced restart can be turned on, verify the firmware version and update to the latest version.

48. Q: How to troubleshoot the non-sensitive touch or touch screen failure problem on the Redmi Watch 5 Lite?

1. If the device enables the Cover to sleep function, you can try to cover the rest screen and light the screen again to see if it is normal;
2. Press the power button 12s to check if the forced restart is normal;
3. Verify the firmware version, update to the latest version and try again.