For users who pay attention to the fashion sense of accessories, we provide a wearing mode specially adapted for necklaces/band pendants. In this mode, as pendants, they can achieve better wearing beauty and presentation effect.
We provide a variety of exquisite Band displays specially designed for wearing necklaces, with better visual presentation under bright screen Band displays and closed screen Band displays. For details, please go to the "Band displays mall - Necklace Band displays" section.
How to wear necklace mode:
Press the button on the back cover to remove the wrist strap
Assemble the necklace clasp and close the necklace back panel
Assembly completed
Data items supported for monitoring: number of steps
Monitoring data items are not supported: heart rate, blood oxygen, sleep, vitality value, calories, duration of moderate to high-intensity activities, etc.
(Due to the way of wearing, it is difficult to guarantee the detection accuracy)
Note: You cannot switch the wearing mode from the App during exercise, pomodoro, or countdown.
Detailed steps to disassemble and assemble the necklace:
1. Assemble the Fitness Tracker: There are two strap assembly slots at both ends of the main body of the band, and the reverse side is close to the end of the charging interface. Assemble the Fitness Tracker with a ring, the hook side faces the main screen of the band, and insert the Fitness Tracker into the strap slot;
The head without ring, insert it into the strap slot at the other end in the same way
2. Assemble the pendant back plate: the charging interface corresponds to the magnet cover of the pendant back plate, and the pendant back plate is adsorbed on the main body of the band;
3. Assemble the sling: Straighten both ends of the sling according to the position of the metal buckle, hold the other end and pass it through the large ring of the head first, and then through the small ring of the pendant;
Pull out the rope and stretch it, and pass the metal buckle end of the sling through, tighten the rope, and the pendant is assembled;
4. Disassembly of the metal buckle of the sling: Hold both ends of the metal buckle and press it toward the middle. Turn your left hand outward and your right hand inward to open the metal buckle;
5. Fasten the metal buckle of the sling: align the small point at one end of the metal buckle with the notch at the other end, assemble it, and press it to the middle, turn the left hand inward and the right hand outward, and the metal buckle is fastened;
6. To disassemble the Fitness Tracker, press the quick release button to remove the Fitness Tracker with ring. The ringless Fitness Tracker is down, press the quick release button, and use the weight to realize quick disassembly.
7. Subsequent assembly, only need to assemble the Fitness Tracker, can complete the quick assembly, no need to disassemble the rope;
We provide a variety of exquisite Band displays specially designed for wearing necklaces, with better visual presentation under bright screen Band displays and closed screen Band displays. For details, please go to the "Band displays mall - Necklace Band displays" section.
How to wear necklace mode:
Press the button on the back cover to remove the wrist strap
Assemble the necklace clasp and close the necklace back panel
Assembly completed
Data items supported for monitoring: number of steps
Monitoring data items are not supported: heart rate, blood oxygen, sleep, vitality value, calories, duration of moderate to high-intensity activities, etc.
(Due to the way of wearing, it is difficult to guarantee the detection accuracy)
Note: You cannot switch the wearing mode from the App during exercise, pomodoro, or countdown.
Detailed steps to disassemble and assemble the necklace:
1. Assemble the Fitness Tracker: There are two strap assembly slots at both ends of the main body of the band, and the reverse side is close to the end of the charging interface. Assemble the Fitness Tracker with a ring, the hook side faces the main screen of the band, and insert the Fitness Tracker into the strap slot;
The head without ring, insert it into the strap slot at the other end in the same way
2. Assemble the pendant back plate: the charging interface corresponds to the magnet cover of the pendant back plate, and the pendant back plate is adsorbed on the main body of the band;
3. Assemble the sling: Straighten both ends of the sling according to the position of the metal buckle, hold the other end and pass it through the large ring of the head first, and then through the small ring of the pendant;
Pull out the rope and stretch it, and pass the metal buckle end of the sling through, tighten the rope, and the pendant is assembled;
4. Disassembly of the metal buckle of the sling: Hold both ends of the metal buckle and press it toward the middle. Turn your left hand outward and your right hand inward to open the metal buckle;
5. Fasten the metal buckle of the sling: align the small point at one end of the metal buckle with the notch at the other end, assemble it, and press it to the middle, turn the left hand inward and the right hand outward, and the metal buckle is fastened;
6. To disassemble the Fitness Tracker, press the quick release button to remove the Fitness Tracker with ring. The ringless Fitness Tracker is down, press the quick release button, and use the weight to realize quick disassembly.
7. Subsequent assembly, only need to assemble the Fitness Tracker, can complete the quick assembly, no need to disassemble the rope;