Download and open the Mi Fitness App, log in to your Xiaomi account, and follow the pop-up prompts to enable App-related permissions.
Andorid pairing method:
Method 1: Search to add: Mi Fitness App- device- plus sign in the upper right corner -> add device -> pair.
Search for pairing, select the device on your mobile phone that matches the last four digits of the band's Bluetooth address. After connecting to the band, a check mark will be displayed. Click the check mark to confirm pairing.
Method 2: Add by model: Mi Fitness App- device -> Plus sign in the upper right corner -> Add device -> Add by model -> Select Xiaomi Smart Band 8, it will automatically search for the nearest device and request to connect to the band, connect to the band A checkmark key will be displayed. Click the checkmark key to confirm the pairing.
Method 3: Scan and add: Mi Fitness App-device -> Plus sign in the upper right corner -> Scan, you can directly scan the QR code on the band to connect and pair.
Method 4: Add proximity discovery: When the unpaired new band is close to the phone (only supported by some MIUI models), the MIUI system will pop up a window to discover the device, and the phone will pop up a box to prompt the device model, the last four digits of the Bluetooth address, and the device picture. You can directly Click "Connect this device."
Unpairing method:
Method 1: Unpair the device management list: When the band is connected to the mobile phone, open Mi Fitness App->Device->View all devices->Long press the current device->Unpair, click "Unpair" to unpair, and then proceed after unpairing The ring will be factory reset.
Method 2: Unpair the current device: While the band is connected to the mobile phone, open Mi Fitness App->Device->Scroll to the bottom->Unpair, click "Unpair" to unpair, and the band will be restored to factory settings after unpairing.
Notice:
If the band cannot be found during the process of adding a device, or the band cannot be connected during use, please try to slide up and down on the page of the band to be bound, select factory reset on the system operation interface, and then re-add the bound device;
When the strip is not bound, the screen will display "Download the App to pair the strip", and the function of the strip can only be used after pairing.
iOS pairing method:
Method 1: Search to add: Mi Fitness App-device -> plus sign in the upper right corner -> add device -> put the phone and band together to search and pair, select the device on the phone that is consistent with the last four digits of the band's Bluetooth address , a check mark button will be displayed after connecting to the band, click the check mark button, click "Pair" on the phone to confirm the pairing, click "Cancel" to cancel the pairing.
Method 2: Add by model: Mi Fitness App-device -> Plus sign in the upper right corner -> Add device -> Add by model -> Select Xiaomi Smart Band 8, it will automatically search for the nearest device and request to connect to the band, connect to the band A check mark button will be displayed, click the check mark button, click "Pair" on the phone to confirm the pairing, click "Cancel" to cancel the pairing.
Method 3: Scan and add: Mi Fitness App-device -> Plus sign in the upper right corner -> Scan. You can directly scan the QR code on the band to connect and pair. After connecting to the band, a check mark button will be displayed. Click Checkmark key, click "Pair" on the phone to confirm pairing, click "Cancel" to cancel pairing.
iOS unpairing:
Method 1: Unpair from the device management list: With the band connected to your phone, open Mi Fitness App->Device->Wearable Device->Swipe left to select Unpair, click "Unpair" to unpair, and the band will be restored to factory settings after unpairing. .
Method 2: Unpair the current device: While the band is connected to the mobile phone, open Mi Fitness App->Device->Scroll to the bottom->Unpair, click "Unpair" to unpair, and the band will be restored to factory settings after unpairing.
Notice:
After the iOS Mi Fitness App Unpairs A device, before re-pairing A device next time, you need to select A device in the system Bluetooth and click "Ignore this device", as shown in the figure below, otherwise the current device cannot be bound.
Andorid pairing method:
Method 1: Search to add: Mi Fitness App- device- plus sign in the upper right corner -> add device -> pair.
Search for pairing, select the device on your mobile phone that matches the last four digits of the band's Bluetooth address. After connecting to the band, a check mark will be displayed. Click the check mark to confirm pairing.
Method 2: Add by model: Mi Fitness App- device -> Plus sign in the upper right corner -> Add device -> Add by model -> Select Xiaomi Smart Band 8, it will automatically search for the nearest device and request to connect to the band, connect to the band A checkmark key will be displayed. Click the checkmark key to confirm the pairing.
Method 3: Scan and add: Mi Fitness App-device -> Plus sign in the upper right corner -> Scan, you can directly scan the QR code on the band to connect and pair.
Method 4: Add proximity discovery: When the unpaired new band is close to the phone (only supported by some MIUI models), the MIUI system will pop up a window to discover the device, and the phone will pop up a box to prompt the device model, the last four digits of the Bluetooth address, and the device picture. You can directly Click "Connect this device."
Unpairing method:
Method 1: Unpair the device management list: When the band is connected to the mobile phone, open Mi Fitness App->Device->View all devices->Long press the current device->Unpair, click "Unpair" to unpair, and then proceed after unpairing The ring will be factory reset.
Method 2: Unpair the current device: While the band is connected to the mobile phone, open Mi Fitness App->Device->Scroll to the bottom->Unpair, click "Unpair" to unpair, and the band will be restored to factory settings after unpairing.
Notice:
If the band cannot be found during the process of adding a device, or the band cannot be connected during use, please try to slide up and down on the page of the band to be bound, select factory reset on the system operation interface, and then re-add the bound device;
When the strip is not bound, the screen will display "Download the App to pair the strip", and the function of the strip can only be used after pairing.
iOS pairing method:
Method 1: Search to add: Mi Fitness App-device -> plus sign in the upper right corner -> add device -> put the phone and band together to search and pair, select the device on the phone that is consistent with the last four digits of the band's Bluetooth address , a check mark button will be displayed after connecting to the band, click the check mark button, click "Pair" on the phone to confirm the pairing, click "Cancel" to cancel the pairing.
Method 2: Add by model: Mi Fitness App-device -> Plus sign in the upper right corner -> Add device -> Add by model -> Select Xiaomi Smart Band 8, it will automatically search for the nearest device and request to connect to the band, connect to the band A check mark button will be displayed, click the check mark button, click "Pair" on the phone to confirm the pairing, click "Cancel" to cancel the pairing.
Method 3: Scan and add: Mi Fitness App-device -> Plus sign in the upper right corner -> Scan. You can directly scan the QR code on the band to connect and pair. After connecting to the band, a check mark button will be displayed. Click Checkmark key, click "Pair" on the phone to confirm pairing, click "Cancel" to cancel pairing.
iOS unpairing:
Method 1: Unpair from the device management list: With the band connected to your phone, open Mi Fitness App->Device->Wearable Device->Swipe left to select Unpair, click "Unpair" to unpair, and the band will be restored to factory settings after unpairing. .
Method 2: Unpair the current device: While the band is connected to the mobile phone, open Mi Fitness App->Device->Scroll to the bottom->Unpair, click "Unpair" to unpair, and the band will be restored to factory settings after unpairing.
Notice:
After the iOS Mi Fitness App Unpairs A device, before re-pairing A device next time, you need to select A device in the system Bluetooth and click "Ignore this device", as shown in the figure below, otherwise the current device cannot be bound.