Is it normal for the Xiaomi Smart Filtered Water Dispenser Pro to have a faint trace visible on both sides of the light?
A: The Xiaomi Smart Filtered Water Dispenser Pro uses a traditional injection molding process, and there are some process characteristics of the injection molding process.
For example, the high-gloss surface of the body can be seen under the side light, but it is difficult to detect the process traces at a normal angle. This phenomenon belongs to the inherent characteristics of the injection molding process and does not affect the use and appearance, please feel free to use it.
Supplementary notes:
Assembly line, also known as overflow line: Excess plastic flows out at the joint of the mold, leaving visible marks after cutting off the overflow edge. It is the joint seam under the main model of the plastic mold used to indicate that the mold is split in half, and the product design and construction do not affect normal use.
For example, the high-gloss surface of the body can be seen under the side light, but it is difficult to detect the process traces at a normal angle. This phenomenon belongs to the inherent characteristics of the injection molding process and does not affect the use and appearance, please feel free to use it.
Supplementary notes:
Assembly line, also known as overflow line: Excess plastic flows out at the joint of the mold, leaving visible marks after cutting off the overflow edge. It is the joint seam under the main model of the plastic mold used to indicate that the mold is split in half, and the product design and construction do not affect normal use.
Does it help?
Yes
No