Mi Vacuum Cleaner Light

Product Introduction

1.Q: What package contents does Mi Vacuum Cleaner Light have？

A:Main unit × 1

Extension rod × 1

Main brush × 1

Crevice nozzle × 1

Brush nozzle × 1

Mounting station × 1(includes expansion screw × 2, expansion tube × 2)

User manual × 1

Power adapter × 1

1.Crevice nozzle: suitable for cleaning narrow slit, door and window dead corner, sofa and other cloth art furniture mites, dust cleaning, and other narrow gaps.

2. Brush nozzle: suitable for keyboard, furniture, wardrobe, bed surface, sofa and other cloth furniture dust cleaning;

3. Mounting station: Mi Vacuum Cleaner Light is used to support the vacuum cleaner when parking, storage or charging, so that the vacuum cleaner does not slip on the floor. It can also be used to store accessories: crevice nozzle and brush nozzle.

2.Q: Can Mi Vacuum Cleaner Light be used in carpet？

A:Mi Vacuum Cleaner Light can be used in all kinds of (short hair, medium hair, long hair) carpet.

3.Q: Does Mi Vacuum Cleaner Light supports dry and wet dual use?

A:Not support.This brushless motor is for dry motor, do not absorb liquid, such as cola, jam, soup porridge, etc.If you accidentally suck the liquid, you need to take off the relevant components, discharge the water through air dry, sun dry and other ways as soon as possible.

 

4.Q: What should be paid attention to when emptying Mi Vacuum Cleaner Light?

A:Please pay attention to the following matters:

1. Please turn off the vacuum cleaner before cleaning and maintaining it.

2. It is necessary to unplug the metal nozzle from the main engine;

3. Please aim the dust cup at the garbage can for disassembly, so as to avoid dust falling on the floor.

5.Q: How to remove and install the dust cup？

A:When there is more garbage in the dust cup, first remove the metal nozzle from the dust cup, and then remove the dust cup,

1. Rotate the dust cup in the direction shown in the picture. When the dot "O" is aligned with the mark of "

 

" for unlocking, the dust cup can be separated from the main machine.If the metal nozzle is not removed, the cyclone tower cannot be lifted after the dust cup is directly separated from the main engine.

2. Hold the handle of HEPA filter element from the dust cup above the trash can, take out the HEPA filter element according to the direction shown in the picture, and gently pat/flick off the dust on the surface of the filter element (it can be washed regularly and dried before use)

3.Turn over the handle of the cyclone tower over the trash can (remember not to pull it out hard, if it can not be pulled off easily, please check whether the metal nozzle has been separated from the dust cup), separate the cyclone tower from the dust cup, and pour out the garbage and surface dust in the dust cup and the cyclone tower.

4. After cleaning the garbage in the dust cup, put the cyclone tower and HEPA filter element back into the dust cup successively, align the unlocking sign "

 

" of the dust cup assembly with the dot" O "of the main engine, and then rotate the dust cup according to the direction shown in the picture. When the dot" O "is aligned to lock the mark"

 

", and "click" is heard, it is proved that the dust cup is locked with the main engine.

6.Q: Does Mi Vacuum Cleaner Light support to connect to App？

A:It can’t connect to network and Mi Home App.

7.Q:How to check whether the charging status of Mi Vacuum Cleaner Light is normal？

A:1. Before charging, make sure that the power adapter is well connected with the AC power supply, and the output end of the adapter is inserted into the charging port of the vacuum cleaner host;

2. When charging, the quantity indicator flashes with breath;

3. After full charge, the electric quantity indicator light will go off immediately;

4. If the battery is charged at full charge, the power indicator will turn off after breathing for 20 seconds.

8.Q: How to do if the electric quantity indicator of Mi Vacuum Cleaner Light shows red?

A:When the power indicator of the vacuum cleaner flashes in red, it means that the power of the vacuum cleaner is not much and it needs to be charged in time.At this point, if the vacuum is in standard mode, you cannot switch to power mode.If not charged in time, the battery voltage is too low, in order to protect the battery, the vacuum cleaner will automatically appear power protection.After the low power off, please charge in time, so as not to store the battery for a long time, resulting in excessive battery consumption, battery damage.

9.Q: Does Mi Vacuum Cleaner Light need to be fully charged when first use? How long should be charged?

A:When using this product for the first time, the vacuum cleaner will have a small amount of power, so you need to connect the adapter to charge it.It is recommended to use after full charge.

It takes 5 hours to charge. When charging, Mi Vacuum Cleaner Light shows white indicator state. After full power, the white light is always on and then goes out.

Note: The vacuum cleaner does not work properly while charging.

 

Frequently ask question

1.Q: What if MI Vacuum Cleaner Light can't work?

A:Generally, failure to work is caused by the following reasons:

1. Low power protection, need to charge

2. The vacuum cleaner power switch is not turned on;Long press the power button for 1S

3. Motor 8S plug protection;Clear passages of foreign bodies

4. When the temperature is too high, the charging will be turned off.Please wait until the temperature drops below the recovery temperature of charging, then charge normally at the re-entry place

5. Motor damage/battery damage;Looking for after-sale treatment

2.Q: What should I do if the suction is weakened?

A:1. Please confirm whether the electric quantity is sufficient;

2, whether because the standard gear suction is small, can be adjusted as needed for the strong gear

3. Please confirm whether too much garbage is absorbed. If so, please clean up the dust cup in time.

4. Please confirm whether there is any foreign body blocked in the suction mouth and nozzles of the brush, if so, please clean up the foreign body in time;

5. Please confirm whether the mesh of cyclone tower and HEPA are blocked by too much dust. If so, please clean up in time;

6. Please confirm whether the filter element and filter cotton have been washed. After washing, it is not dried and used directly, which will cause the dust and water to condense into blocks and block the filtration system.

7. If there is no blockage or power, gear and other problems, it may be the motor problem, please contact the after-sales service in time.

3.Q:What should I do if MI Vacuum Cleaner Light gets hot after working for a while?

A:1. Please check whether there is any foreign body blocking the pipe orifice or the main engine orifice. If this happens, please clean the foreign body in time;

2. Please check whether the filter element is dirty and has not been cleaned. If this happens, please clean the filter element in time

4.Q: Why does the Mi Vacuum Cleaner Light stop automatically when it is used?

A:The brush of Mi Vacuum Cleaner Light has over-flow temperature protection. When the brush head is blocked by foreign bodies, entangled or the motor temperature is too high, it will protect the machine from dangerous shutdown, remove foreign bodies or reduce the temperature, and restart the machine.

5.Q: What should I do when I use Mi Vacuum Cleaner Light with too much noise?

A:Please check whether the dust cup is full and whether the suction of the brush is blocked by foreign matter. Clean up the foreign matter in time.