Mi Smart Antibacterial Humidifier FAQ

1.Q:How does Mi Smart Antibacterial Humidifier work to produce water mist to get humidified?

A:Mi Smart Antibacterial Humidifier uses ultrasonic wave to generate 1.7 million high frequency oscillation per second, the water mist is converted into 1-5 micron ultramicron particles, through the pneumatic device, the water mist is diffused into the air, so as to achieve the purpose of uniform humidifying air, Humidifier can make the room to maintain ideal humidity and prevent the generation of static electricity.

 

2.Q:How to install Mi Smart Antibacterial Humidifier?

A:1. Open the tank cover and add water to the tank to the highest water level.

2. Put the water tank on the base (transparent water ruler facing the power key can be easily installed).

 

3.Q: How does Mi Smart Antibacterial Humidifier turn on and turn off？

Start operation: ensure that the power supply is consistent with the working voltage of the machine, connect the power supply, the machine "drip" sound, into the standby state, the water tank light on, WIFI indicator light flashing.Then press the open key, the machine "drip" sound and start to work, the default low fog.

Shutdown operation: long press on the key for 3 seconds, the machine "drip" after the power off, the light ring lights out.

 

4.Q:How to adjust the gear?

A :Mi Smart Antibacterial Humidifier will make a "drip" sound and start working after starting the machine.

1. After starting the default low fog, the white light of the lamp ring shows 1/4 turn, it is suggested that spring humidification;

2. Click again, the mid-range fog, the white light of the lamp ring shows 1/2 circle, it is suggested that the summer air conditioning humidification;

3. Click again, high-grade fog, white light ring display 3/4 laps, it is suggested that autumn and winter dry season humidification;

4. Click again to enter the constant humidity mode. The whole circle of the lamp will display white light, and the fog quantity will be automatically adjusted.

 

5. Q: What is the meaning of the constant humidity mode?

A:

The constant humidity mode of Mi Smart Antibacterial Humidifier refers to that the humidifier enters the constant humidity state and the button light of the humidifier enters the constant humidity mode when the whole turn is on. The default humidity value is about 60% of the room's humidity value.When the ambient humidity reaches the humidity value, the humidifier will stop working, and it will start again when the humidity is lower.

Note: according to research, the average humidity of domestic cities in April is about 58%, which is also the appropriate humidity for human health and furniture.Therefore, the humidity set in the constant humidity mode of Mi Smart Antibacterial Humidifier is about 60%.

 

6.Q: How to control the light state?

A: When the humidifier is working, press WIFI button once and the machine "drops" to turn off the water tank light, lamp ring light and WIFI indicator light;Press again, the machine "drip", can open the light again.

Note: 1. After the water tank light is turned off, the machine shall carry out sterilizing and humidifying work normally;

2. To control the accompanying tone of the keys, it is necessary to connect WIFI and control through Mi Home APP.

 

7.Q: What is the water shortage protection function?

A: The water shortage protection function refers to that when the water tank is short of water or the water tank is lifted and moved away, the buzzer "drip, drip, drip" alarms three times and enters the standby state. The lamp ring lights up with red light. Add water to the water tank or install the water tank on the humidifier base, and it can work normally after restarting.

8.Q: Does Mi Smart Antibacterial Humidifier support bluetooth gate function ?

A: Mi Smart Antibacterial Humidifier doesn’t support bluetooth gate function.

 

9.Q:How is the Mi Smart Antibacterial Humidifier sterilized?

A:Humidifying water source is very important, tap water generally contains miscellany bacteria, pure water stored in the tank for A long time will also produce bacteria.Before each humidification and atomization, the water will flow into the UV-C sterilization area, which will be sterilized and purified in time to avoid the pollution of stored water and tap water. The purified water will be released after being oscillated into water mist.

 

10.Q:What area of room does Mi Smart Antibacterial Humidifier apply to?

A:The room area of Mi Smart Antibacterial Humidifier is about 20-35 ㎡.

 

11.Q:How much is the Humidifier?

A:It is about 300±50mL/h.

 

12.Q:What is a transparent line on the fuselage?

A:The line on the fuselage is a transparent water gauge, so you can see the remaining water of the humidifier more intuitively and clearly.

13.Q:Does Mi Smart Antibacterial Humidifier support the use of composite filter elements?

A:Mi Smart Antibacterial Humidifier doesn't support composite filter element.

 

14.Q:Does Mi Smart Antibacterial Humidifier support silver ion sterilization?

A:Mi Smart Antibacterial Humidifier doesn't support silver ion sterilization.

 

15.Q:Does Mi Smart Biomaterial Humidifier support air filtration?

A:Support.

 

16.Q: Does Mi Smart Antibacterial Humidifier have a screen?

A:No.

 

17.Q: Can Mi Smart Antibacterial Humidifier add essential oil, Antibacterial and so on?

A: Because the humidifier works through high-frequency vibration atomizing tablets and produces fine fog dissolved into the air, it will enter the body with human breathing, so it is not recommended to add any additives in the water during the use process, so as not to cause harm to the body.It is recommended to use filtered water or pure water when conditions permit.

 

18.Q:How to clean and maintain it?

A:It is recommended to clean the sink and atomizer plate once a week when the Mi Smart Antibacterial Humidifier is in frequent use.The steps of daily cleaning and maintenance are as follows:

1. Before cleaning, be sure to cut off the power supply, unplug the power plug;

2. The sink can be directly wiped clean with a clean soft wet cloth;

3. The tank and atomizer, it is recommended to clean once a week: if there is scale in the tank, you can pour citric acid into the tank (to dissolve scale), and then wipe the scale with a cotton swab or a soft brush, and then clean with water.

Note: Do not flush the base for clean, otherwise the machine will be abnormal.

 

 

1.Q: How does Mi Smart Antibacterial Humidifier connect to Mi Home APP?

A:1. Open Mi Home APP and turn on Bluetooth of mobile phone;

2. Long press the WIFI button until the sound drops, the WIFI indicator flashes, and the humidifier enters the state to be connected;

3. Click "+ "on the upper right corner of Mi Home APP interface,automatic search;

4. After searching Mi Smart Antibacterial Humidifier, click the Humidifier;

5. Configure network;

6. After successful network configuration, the mobile phone will automatically connect with the device and wait for connection.

2.Q:What operations can I do after connecting Mi Home APP?

A:It can operate the Humidifier on/off, adjust the gear, time switch, on/off indicator light, on/off prompt sound and so on through the mobile phone.

 

1.Q:Does Mi Smart Antibacterial Humidifier leak in use?

A: If the user reports that the humidifier leaks after use, it is suggested to perform the following operations:

1, the humidifier can be set for high, medium and low three grades, such as the humidifier working process around the water.May be due to the indoor humidity is too large, please adjust the amount of fog to avoid excessive humidity;

2. It can be suggested to put the humidifier in a slightly higher position to increase the fluidity of the air and avoid the ground being too wet;

3. Inform the user not to fill the water, and the highest water level shall not exceed the highest water level;

4. If water leakage is confirmed, please check whether the humidifier is not placed smoothly;

5. If this problem still appears after use, guide to after-sales detection.

Note: The wrong way to clean the base, the wrong way to add water, and the water in the mist outlet may cause water leakage at the joint of the water tank or the base.

2.Q:Why does Mi Smart Antibacterial Humidifier have wind but no fog?

A: There may be dirt, scale and other blocked Humidifier outlet, sink and other positions, will cause the Humidifier does not appear fog phenomenon.

1 Dirty, it is suggested to wipe clean directly with a clean soft wet cloth;

2. Scale, it is suggested to use white vinegar or citric acid into the sink, dissolve the scale and then clean with water;

3. Check whether the water in the tank is sufficient, the water should exceed the water level sensor switch.

 

3.Q: What is the UV lamp on the base of Mi Smart Antibacterial Humidifier? Is it harmful to human health?

A: The UV lamp on the base is the ultraviolet sterilizing lamp of the humidifier.Harmless to human body.

1. The ultraviolet sterilization lamp inside the humidifier first kills 99.99% of the bacteria in the water and makes the water more pure. Pure water becomes steam into the air of the room, increasing the humidity in the air of the room.

2. The sterilization lamp is closed inside, and it can not see the sterilization light source, which will not cause any harm to the human body. It is recommended to power off when cleaning or adding water.

 

4.Q: How to do if there is no response when powered on, and the indicator light is not on?

A: 1. Please check whether the socket is plugged in and whether the power supply is connected;

2. Bad contact of power switch will lead to no reaction on power;

3. It may be because the wire in the base loosens and falls off during transportation. If the equipment still has no response after checking the above problems, it is suggested to contact the after-sales service for treatment.

5.Q: No air or loud air when using?

A: 1. In the working process of the machine, there is a fan and a atomizing plate. The atomizing plate produces fog through high-frequency vibration, and the fan rotates to blow the fog out.If it affects users' daily life, it is suggested to contact with after sales.

2. the fan power supply interface inside the base or press to the power supply will also appear such a situation, it is suggested to contact the after-sales treatment.

 

6.Q: What should I do if the status light (water tank light, lamp ring light) is not on?

A:1. Please check whether the WIFI button is pressed. When the WIFI button is pressed in use, the status light (water tank light, light ring light) will be turned off, and then the status light will be restarted.

2. it is suggested to power off and restart the humidifier to see if the status light will return to normal;

3. such as has not been bright, but still normally work, guide to conduct after-sales testing.

 

7.Q: When Mi Smart Antibacterial Humidifier used together with air purifier and PM2.5 detector, will cause air purifier and the detector show abnormal PM2.5?

A: Under normal conditions;Similarly, PM2.5 value display page of PM2.5 detector will increase, which is normal.

Therefore, it is recommended that users should not use air purifier and humidifier at the same time. If they must use it at the same time, they should try to make the purifier and PM2.5 detector far away from the humidifier or not use it in the same room. This situation is not a quality issue, nor is it a product issue.Most of the current sensor solutions will lead to this situation, when using attention to try not to use at the same time or a long distance to use.