Can the Mijia Front Load Washer Dryer 10.5kg be embedded?
The Mijia Front Load Washer Dryer 10.5kg should be installed in a suitable, well-prepared location with proper power and water connections, stable water pressure, and a hard, flat surface to ensure safe, quiet, and efficient use. It can also be installed as a built-in unit inside an alcove or closet, but make sure there is enough clearance on all sides for ventilation and maintenance. Proper leveling, balance checking, and secure placement will help prevent vibration and extend the appliance’s lifespan.
To install the Mijia Front Load Washer Dryer 10.5kg as a built-in unit, please refer to the following method:
The Mijia Front Load Washer Dryer 10.5kg can be embedded. If the washing machine is placed in an alcove or closet, the minimum required clearances are 15 mm on each side, 30 mm at the rear, 20 mm at the top, and 550 mm at the front.
To install the Mijia Front Load Washer Dryer 10.5kg as a built-in unit, please refer to the following method:
The Mijia Front Load Washer Dryer 10.5kg can be embedded. If the washing machine is placed in an alcove or closet, the minimum required clearances are 15 mm on each side, 30 mm at the rear, 20 mm at the top, and 550 mm at the front.
Does it help?
Yes
No