xiaomi-smart-pet-fountain-filter

Xiaomi Smart Pet Fountain FilterSmart Pet
Fountain Filter
Powerful filtering inside a slim body
Multi-layered filtration | Clean, soft water
Safe materials

Four-stage deep filtering
Water that pets love to drink
With the four-stage efficient deep filtering, the fine particles, hair, and residual chlorine including Ca and Mg ions are
effictively intercepted and filtered, improving the taste of the water while also softening and purifying it to
ensure the health of the pet’s urinary system.
Xiaomi Smart Pet Fountain FilterXiaomi Smart Pet Fountain FilterXiaomi Smart Pet Fountain FilterXiaomi Smart Pet Fountain Filter
Micropore PP
membrane
PET cotton
Active carbon
granules
Ion exchange
resin
Xiaomi Smart Pet Fountain Filter
Hair and debris
Silt and dirt
Residual chlorine and odour
Ca or Mg ions
(easy to cause kidney stone)
*It is recommended to replace the filter element once a month. Before use, wash the filter with clean water for two minutes to remove any activated carbon that has become loose during transportation.
Xiaomi Smart Pet Fountain Filter
Selected safe raw materials
Clean, healthy water for pets
Selected global filter materials guarantee the quality of water for pets. The filter frame and PP membrane conform to
requirements for food contact materials*, guaranteeing high-quality water for pets.
*Filter frame and PP membrane conform to FDA regulations on food contact materials: inspection report
code: No. SHAEC2200181902; Testing organisation: SGS
Xiaomi Smart Pet Fountain Filter
Smart filter expiry reminders
set via the app
It is recommended to replace the filter and filter assembly
once a month for better
filtering results. Pair with the
Mi Home/Xiaomi Home app
for timely filter change reminders.
Xiaomi Smart Pet Fountain Filter
Instructions
Filter replacement
1. Wash the filter with clean water for two minutes to remove any activated carbon that has become loose during transportation.
2. Install the filter into the filter slot.
3. Put the lid back on the water tank.
4. Press and hold the filter reset button at the bottom of the dispenser for two seconds. The mode indicator will turn white and the filter timer will reset.
Water pump filter
assembly replacement
As shown in the figure, the water pump filter
assembly can be installed on the water pump.
Water pipe replacement
As shown in the figure, install and connect the water
pipe between the water pump and the lid.
*It is recommended to replace the filter and water pump filter assembly every month.
*It is recommended to replace the water pipe every 2 months.