Why are the Mijia Refrigerator Side-by-Side 715L doors uneven?
If the doors of the Mijia Refrigerator Side-by-Side 715L are misaligned vertically, please follow these steps to troubleshoot:
1. Ensure the adjustable feet are level. You can adjust the door height by modifying the feet on both sides.
2. Use the adjustment gasket provided in the accessories to adjust and lift the lower side of the door body, and use pliers to insert the gasket into the hinge shaft gap. Please be careful when operating.
3. If the issue persists, please contact the local after-sales service center for inspection.
If the front and back of the Mijia Refrigerator Side-by-Side 715L door are uneven, please follow the following methods to troubleshoot:
1. Use the adjustment gasket provided in the accessories to adjust and lift the lower side door body, and use pliers to insert the gasket into the hinge shaft gap. Please be careful when operating.
2. Check whether there are protrusions on the door seal that cause the door to be uneven. Please clean the door seal.
(1). Use hot air to evenly heat the door seal, and please note that blow air evenly at a low wind speed, and do not deform the door seal.
(2). Smooth the door seal airbag by hand (Squeeze the door seal along the door frame to install the door seal in place).
(3). Wait for the door seal to be fixed after cooling.
3. If the issue persists, please contact the local after-sales service center for inspection.
If the Mijia Refrigerator Side-by-Side 715L door can’t be aligned left and right, please follow the following methods to troubleshoot:
1. You can use the adjustment gasket provided in the accessories to adjust the lower side door body, lift it, and use pliers to insert the gasket into the hinge shaft gap. Please be careful when operating.
2. If there is still a deviation after adjustment, please contact the local after-sales service center for inspection.
Does it help?
Yes
No