Why is there no image on the Xiaomi Monitor A27i 2026 screen after powering on?
If there is no image on the Xiaomi Monitor A27i 2026 screen after powering it on, there could be several potential causes, such as an incorrect connection, an unsupported signal, or a problem with the connected device.
Please refer to the following troubleshooting steps to resolve the issue of no image on the Xiaomi Monitor A27i 2026 screen:
1. If there is no image when the power light of Xiaomi Monitor A27i 2026 is on, and the monitor is powered on, please check whether the video cable is connected properly and whether the video output device is started.
2. Connect the monitor to a different computer or device to see if the issue persists. This can help determine whether the problem lies with the monitor or the original computer.
3. Make sure the signal cable (HDMI or DP) is securely connected to both the monitor and the computer or external device. If the cable is loose or damaged, the monitor will not receive any video signal.
4. Try using a different cable on the monitor and the computer. A faulty cable can prevent the monitor from displaying an image.
5. Make sure the computer’s resolution and refresh rate settings are compatible with the monitor’s specifications. If the settings are too high or incompatible, the monitor can not display an image.
6. If all else fails, perform a factory reset on the monitor through the OSD (On-Screen Display) menu to restore the default settings.
7. If the issue persists, please contact the after-sales service center for inspection.
Does it help?
Yes
No