How to clean the water inlet valve filter of the Mijia Front Load Washer Dryer Pro 9kg?

To clean the water inlet valve filter of the Mijia Front Load Washer Dryer Pro 9kg, please refer to the following steps:
  1. Turn off the water tap and unplug the power cord. Loosen and remove the water inlet hose from the back of the washer dryer. Cover the port with a cloth to prevent water from spraying out.
  2. Pull out the filter cover from the water inlet valve hole with nipper pliers and clean it thoroughly.
  1. Use a brush to clean the inside and the outside of the threaded connector.
  2. Reinstall the water inlet valve filter cover. Turn on the water tap and make sure there is no water leakage at the connection.
Note:
  1. This washing machine needs to be used in environments with an ambient temperature above 0 °C.

Does it help?

Yes
No