Function description：
1. Speed meter: it is used to display the current driving speed, When the electric scooter fails, the speedometer shows the fault code.
2. Mode display: There are three riding mode indicators on the control panel. When the electric scooter works in the energy saving mode, the ECO indicator will be on long. When the electric scooter works in standard mode, the "D" indicator light is always on. When the electric scooter is working in motion mode, the "S" indicator light is always on.(Energy saving mode: the highest speed is about 15km/h; Standard mode: Maximum speed around 20km/h; Sport mode: the maximum speed is about 25km/h, with strong power. It is recommended to consider using it after mastering cycling skills.)
3. Bluetooth display: The long and bright bluetooth icon indicates that the electric scooter has been successfully connected to the mobile device.
4. Car lock tip: Determine whether the car is locked through the operation of Mijia APP.
5. Fault display: The wrench icon flashes to indicate that the scooter is out of order.
6. Battery display: display the remaining battery capacity through 5 bars. Each bar represents about 20 percent of the car's full battery.
7. Power switch: Short press the switch to open the electric scooter; long press the switch for 3s or above to close the electric scooter; in boot state, short press the switch once (to open/close the driving light); continuous short press the switch twice to switch the riding mode.
8. High temperature hint: When the thermometer icon is always on, the battery temperature is not less than 50℃. In this case, the vehicle's acceleration capacity is weakened and it may not be able to be charged.