How to place the Mijia Refrigerator Side-by-Side 635L?

Question

Accepted Answer

To place the Mijia Refrigerator Side-by-Side 635L, please refer to the following information:
1. Place the refrigerator in a well-ventilated environment that is away from heat sources and direct sunlight to avoid increased power consumption. Do not install the refrigerator in an area where the ambient temperature is below 10 ℃ or that is unprotected such as a garage, balcony, corridor, etc.
2. Place the refrigerator on a sturdy pad underneath the appliance to avoid discoloration or damage caused by heat emission.
3. If the floor is uneven, use your hands or a tool such as a wrench to adjust the adjustable feet at the bottom of the refrigerator to ensure stability.
4. When placing the refrigerator, take installation clearance into consideration. It is recommended to leave a clearance of at least 10 cm at the top and back and on both sides of the refrigerator.

5. When the doors are closed, the refrigerator requires a placement space of 715 mm in depth and 910 mm in width. When one door is fully open (120°), one side needs 1014 mm in depth and the other side 1150 mm. When both doors are open, the total width required is 1378 mm.

Note:
To prevent tipping hazards caused by instability, the refrigerator must be secured following the installation instructions.