How to connect the Drain Hose of the Mijia Front Load Washer Dryer Pro 9kg?

Question

Accepted Answer

To connect the Drain Hose to the Mijia Front Load Washer Dryer Pro 9kg, please refer to the following ways:
1. Fixing on the edge of the laundry sink:
The Drain Hose must be positioned at a height between 60 cm and 90 cm from the floor. Secure it to the edge of the laundry sink with a thin rope, ensuring that the water flow is not obstructed.
2. Inserting directly into the floor drain:
To prevent siphoning, ensure that the vertical pipe above the floor drain is 60 cm to 90 cm high. A 65 cm vertical pipe is recommended. Make sure the Drain Hose is connected to the vertical pipe at a downward angle.
3. Connecting to the branch pipe of the sink drain:
Connect the end of the Drain Hose to the branch pipe of the laundry sink drain. The height of the branch pipe from the floor should be less than 90 cm.
Note:
1. The Drain Hose of the Mijia Front Load Washer Dryer Pro 9kg cannot be replaced by yourself. If you need to replace the Drain Hose, please contact after-sales service.
2. The extended portion of the Drain Hose for the Mijia Front Load Washer Dryer Pro 9kg should not exceed 2.5 m. Extending the hose too much can affect the drainage time and could trigger the error code “E1.” If this occurs, adjust the length of the Drain Hose accordingly.