Why does the Xiaomi Robot Vacuum S40C repeatedly clean a certain area?

Based on the device’s cleaning strategy and path planning settings, the Xiaomi Robot Vacuum S40C navigates to areas that haven't been cleaned yet according to its planned path. This appears as repeated back-and-forth movements, but it's part of its cleaning process and not actual repeated cleaning.
If the robot vacuum repeatedly cleans a certain area, please refer to the following steps:
1. You can clean the Infrared recharge sensor to prevent dirt from interfering with positioning. If the robot vacuum is unable to accurately locate itself, such as when navigation or positioning fails, it will repeatedly clean the same area;
2. Please remove any foreign objects from the cleaning path;
3. You can try rebuilding the map;
4. Please check whether the firmware is up to date. System issues or outdated firmware will also result in abnormal cleaning behavior;
5. If the above methods do not resolve the issue, please contact the local after-sales service center.