What to do if the Mijia Front Load Washer Dryer 10.5kg spin insufficiently?
If the Mijia Front Load Washer Dryer 10.5kg spin insufficiently, please refer to the following steps to troubleshoot: 1. Check the type of detergent used. For drum washing machines, it is recommended to use low-foaming detergent. If you use high-foaming detergent, please reduce the amount; 2. Check the spin speed. If the clothes are not completely dried, please select a higher speed to spin again; 3. Check whether the drain pump filter is clogged. If the drain pump filter is clogged, it will cause poor drainage. Please clean the drain filter; 4. Check the placement of the drain hose to ensure that there are no bends in the hose from the drain hose to the drain outlet; 5. Load is too small. Small loads (one or two items) will lead to imbalance and poorer spinning performance. It is recommended to wash multiple items together. To correctly place clothes, please refer to the following steps: (1). Put clothes of different sizes together, do not put small items to spin alone; (2). Check whether the clothes are placed in a scattered manner. If the clothes are placed in a disorderly manner, the clothes has risk to become tangled and cause imbalance. If the above methods still cannot solve the problem, please contact the after-sales service center.