What to do if the Mijia Front Load Washer Dryer 10.5kg stops during operation?
If the Mijia Front Load Washer Dryer 10.5kg stops during operation, please refer to the following steps to troubleshoot:
1. Make sure the socket has power before plugging in the power cord;
2. There will be pauses or soaking periods during a cycle. Wait a moment, and the washer dryer will resume automatically;
3. Make sure the mesh filter on the Water Inlet Hose is not clogged;
4. Check whether the Drain Pump Filter Cover is clogged. If the Drain Pump Filter Cover is clogged, it will cause poor drainage. Please clean the drainage filter.
If the above methods still cannot solve the problem, please contact the after-sales service center.
1. Make sure the socket has power before plugging in the power cord;
2. There will be pauses or soaking periods during a cycle. Wait a moment, and the washer dryer will resume automatically;
3. Make sure the mesh filter on the Water Inlet Hose is not clogged;
4. Check whether the Drain Pump Filter Cover is clogged. If the Drain Pump Filter Cover is clogged, it will cause poor drainage. Please clean the drainage filter.
If the above methods still cannot solve the problem, please contact the after-sales service center.
Does it help?
Yes
No