How to remove the Transit Bolts in the Mijia Front Load Washer Dryer 10.5kg?
There are 4 Transit Bolts in the Mijia Front Load Washer Dryer 10.5kg.
To remove the Transit Bolts in the washing machine, please refer to the following steps:
1. Use the wrench to unscrew all the Transit Bolts on the back of the washing machine;
2. Hold the bolt caps and pull the bolts out of the bolt holes. Keep the Transit Bolts in a safe place for future use when needed;
3. Seal the 4 bolt holes with the Transit Bolt hole covers provided in the accessory bag to prevent dust from entering.
Note:
1. The Transit Bolts of the Mijia Front Load Washer Dryer 10.5kg must be removed before it can be used normally;
2. If the Mijia Front Load Washer Dryer 10.5kg is used without removing the Transit Bolts, it will cause the washing machine to vibrate violently, shift, and other problems that will prevent it from working properly;
3. The Transit Bolt Hole Covers are used to prevent dust from entering. Not installing it will not affect the use, but it will cause dust to enter.
To remove the Transit Bolts in the washing machine, please refer to the following steps:
1. Use the wrench to unscrew all the Transit Bolts on the back of the washing machine;
2. Hold the bolt caps and pull the bolts out of the bolt holes. Keep the Transit Bolts in a safe place for future use when needed;
3. Seal the 4 bolt holes with the Transit Bolt hole covers provided in the accessory bag to prevent dust from entering.
Note:
1. The Transit Bolts of the Mijia Front Load Washer Dryer 10.5kg must be removed before it can be used normally;
2. If the Mijia Front Load Washer Dryer 10.5kg is used without removing the Transit Bolts, it will cause the washing machine to vibrate violently, shift, and other problems that will prevent it from working properly;
3. The Transit Bolt Hole Covers are used to prevent dust from entering. Not installing it will not affect the use, but it will cause dust to enter.
Does it help?
Yes
No