What to do if the i Fresh of the Mijia Refrigerator Cross Door 510L does not cool or the cooling effect is poor?

If the Mijia Refrigerator Cross Door 510L i Fresh does not cool or the cooling effect is poor, please check it according to the following methods:
1. The i Fresh temperature is adjusted to -1℃ at the lowest, and it cannot be used as a freezer. If you need to place frozen items, please place them in the freezer;
2. During the operation of the refrigerator, because the air is circulating and the compressor is not in a state of continuous operation, it is normal for the actual temperature to have a slight temperature difference from the set temperature;
3. Check whether the i Fresh temperature is set too high. The temperature setting range of the i Fresh of the refrigerator is -1-5℃. If the temperature is adjusted too high, you will not feel cool enough. If you feel the temperature is too high, please lower the temperature;
4. Check whether the refrigerator door is frequently opened and closed or the door is opened for too long, causing a lot of hot air to enter the refrigerator, resulting in a poor cooling effect of the refrigerator. Please close the refrigerator door and set the temperature to the Super Cool mode, and observe for a while;
5. Check if the temperature of the food in the i Fresh is too high, such as hot rice, hot dishes, hot soup, etc. The temperature inside the refrigerator will rise after putting in food with high heat. It takes a certain amount of time to cool down;
6. Check if the freezer temperature is set too high. Because the refrigerator has a single-cycle refrigeration system, the refrigerator will cool down more slowly when the freezer is set high. Please set the freezer to -20℃ or below;
7. Check whether some fresh food or other items have been placed in the i Fresh for a long time. Fresh food or other items cannot be kept fresh for a long time in the i Fresh;
8. Check if there is too much food in the i Fresh. Putting too much food will cause the air circulation inside the refrigerator to be blocked, affecting the refrigeration effect. Please do not pile up when placing food, and leave space between food;
9. Check if there is enough distance around the refrigerator. The refrigerator is designed to dissipate heat on both sides, and a certain amount of space needs to be left on both sides. If the space on both sides is small or blocked by other items, the refrigerator will not dissipate heat well, and the cooling effect will be poor. Please leave at least 5cm distance on both sides of the refrigerator;
10. Check if there are gaps, loose seals or deformations around the door seal. Please clean the door seal.
(1). Use hot air to evenly heat the door seal (Blow air evenly at low wind speed, and do not deform the door seal);
(2). Smooth the door seal airbag by hand (Squeeze the door seal along the door frame to install the door seal in place);
(3). The door seal can be fixed after cooling.
If the issue still persists, please apply for local after-sales service center inspection.