How to disassemble the filter adapter ring of the Xiaomi 15 Ultra Photography Kit?
To disassemble the filter adapter ring, please refer to the following steps:
1. Press and hold the release button and twist the 67mm filter adapter ring counter-clockwise;
2. Rotate the decorative ring alignment point to the position shown in the illustration to remove it;
3. Remove the 67mm filter adapter ring.
Note:
If the filter and the adapter ring are installed too tightly, the filter and the adapter will be removed together. In this case, the filter and the adapter ring can be separated by placing the filter and the adapter ring on the protective case (the position of step 2 in the installation) and turning it counter-clockwise.
1. Press and hold the release button and twist the 67mm filter adapter ring counter-clockwise;
2. Rotate the decorative ring alignment point to the position shown in the illustration to remove it;
3. Remove the 67mm filter adapter ring.
Note:
If the filter and the adapter ring are installed too tightly, the filter and the adapter will be removed together. In this case, the filter and the adapter ring can be separated by placing the filter and the adapter ring on the protective case (the position of step 2 in the installation) and turning it counter-clockwise.
Does it help?
Yes
No