What are the precautions for installing the Xiaomi Smart Ceiling Light D30?
The precautions for installing the Xiaomi Smart Ceiling Light D30 are listed below:
1. The installation of this product is limited to concrete ceilings only, and it is strictly prohibited to install it on ceilings that are made of other materials;
2. Before installing this light, please ensure that power is cur off, and that the weight of this light does not exceed the load-bearing capacity of the ceiling;
3. In order not to compromise the dust-resistant performance of this product, it is recommended that you choose IP50 junction box as a priority when installing this product;
4. During installation, please do not touch the surface of the unprotected lampshade with your fingers to avoid causing sweat-induced light spots. In case of any surface spots are caused by contamination, use a lint-free dry cloth and apply moderate pressure to wipe it clean;
5. The house icon indicates that the light is intended for indoor use only, please do not use it in wet environments (for example, the bathroom) or in environments lacking rainproof and waterproof measures;
6. The slip icon indicates that “Caution: Risk of electric shock”; during installation, replacement, or disassembly of this light, it is crucial to ensure that the power supply is completely disconnected. Failure to do so will result in electric shock to individuals, personal injure, or even death;
7. To prevent damage to this light and avoid potential safety risks, do not expose this light to water and heat sources when using it, and never cover the lampshade;
8. This light can be controlled through the Mi Home/Xiaomi Home APP on your phone. Turning off this light by the APP does not cut it off from the electricity, hence, do not touch, replace, or disassemble this light in this case. Otherwise, it will cause an electric shock, personal injury, or even death;
9. The light source contained in this luminaire shall only be replaced by the manufacturer or service agent;
10. The light shall be installed by a qualified electrician, and the wiring must comply with the standards;
11. Type Z attachment: The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed;
12. This light is suitable for traditional mechanical wall switches, and the smart switches with dimming function will not be compatible with it;
13. The light is fragile, please do not drop it during installation.
1. The installation of this product is limited to concrete ceilings only, and it is strictly prohibited to install it on ceilings that are made of other materials;
2. Before installing this light, please ensure that power is cur off, and that the weight of this light does not exceed the load-bearing capacity of the ceiling;
3. In order not to compromise the dust-resistant performance of this product, it is recommended that you choose IP50 junction box as a priority when installing this product;
4. During installation, please do not touch the surface of the unprotected lampshade with your fingers to avoid causing sweat-induced light spots. In case of any surface spots are caused by contamination, use a lint-free dry cloth and apply moderate pressure to wipe it clean;
5. The house icon indicates that the light is intended for indoor use only, please do not use it in wet environments (for example, the bathroom) or in environments lacking rainproof and waterproof measures;
6. The slip icon indicates that “Caution: Risk of electric shock”; during installation, replacement, or disassembly of this light, it is crucial to ensure that the power supply is completely disconnected. Failure to do so will result in electric shock to individuals, personal injure, or even death;
7. To prevent damage to this light and avoid potential safety risks, do not expose this light to water and heat sources when using it, and never cover the lampshade;
8. This light can be controlled through the Mi Home/Xiaomi Home APP on your phone. Turning off this light by the APP does not cut it off from the electricity, hence, do not touch, replace, or disassemble this light in this case. Otherwise, it will cause an electric shock, personal injury, or even death;
9. The light source contained in this luminaire shall only be replaced by the manufacturer or service agent;
10. The light shall be installed by a qualified electrician, and the wiring must comply with the standards;
11. Type Z attachment: The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed;
12. This light is suitable for traditional mechanical wall switches, and the smart switches with dimming function will not be compatible with it;
13. The light is fragile, please do not drop it during installation.
Does it help?
Yes
No