How to clean the Xiaomi Blender Pro?
To clean the blender, please refer to the following steps:
1. After pouring out the beverage, add water up to the maximum water level of cold drinks and utilize the clean function for a quick interior cleaning of the blending jar;
2. After the blender has cooled down, unplug the power cord. Open the lid and quiet lid, then rinse the inner walls of the blending jar, lid, and quiet lid with clean water. Use a cleaning brush for thorough cleaning. The lid seal ring and quiet lid seal ring can be removed for separate cleaning;
3. The quiet lid assembly can be removed for cleaning as follows: Hold the upper quiet lid and lower quiet lid with both hands, gently rotate the lower quiet lid in a clockwise direction, remove it and then detach its sealing ring. Clean the upper quiet lid, lower quiet lid, and the quiet lid sealing ring separately. Once cleaning is complete, reassemble them for further use;
4. After cleaning, reinstall the lid seal ring and quiet lid seal ring into their respective slots on the lid. It is recommended to wipe dry or air-dry the parts before reassembling and storing them;
5. If hard residue forms inside the blending jar and it is difficult to remove, soak it in a moderate amount of water until softened, then wash and dry thoroughly. A cleaning brush can be used to scrub the inside of the blending jar;
6. When the heating plate is not cleaned thoroughly multiple times, or if there is a stubborn layer of residue at the bottom, soak it in water for a period of time. Then, use a cleaning brush to wipe it clean. Exercise caution when wiping near the blades to avoid cuts;
7. When some parts are stained by the juice, wiping these parts with several drops of cooking oil before cleaning can help remove the stains more easily. Rinse the parts with clean water and wipe them dry thoroughly.
Note:
1. During operation, depending on the ingredients, the lid and lid seal ring can become stained to varying degrees, which is a normal occurrence;
2. When the blender is not used for a long time, please store it in a dry and ventilated place to prevent the motor from getting wet and affecting its future use.
1. After pouring out the beverage, add water up to the maximum water level of cold drinks and utilize the clean function for a quick interior cleaning of the blending jar;
2. After the blender has cooled down, unplug the power cord. Open the lid and quiet lid, then rinse the inner walls of the blending jar, lid, and quiet lid with clean water. Use a cleaning brush for thorough cleaning. The lid seal ring and quiet lid seal ring can be removed for separate cleaning;
3. The quiet lid assembly can be removed for cleaning as follows: Hold the upper quiet lid and lower quiet lid with both hands, gently rotate the lower quiet lid in a clockwise direction, remove it and then detach its sealing ring. Clean the upper quiet lid, lower quiet lid, and the quiet lid sealing ring separately. Once cleaning is complete, reassemble them for further use;
4. After cleaning, reinstall the lid seal ring and quiet lid seal ring into their respective slots on the lid. It is recommended to wipe dry or air-dry the parts before reassembling and storing them;
5. If hard residue forms inside the blending jar and it is difficult to remove, soak it in a moderate amount of water until softened, then wash and dry thoroughly. A cleaning brush can be used to scrub the inside of the blending jar;
6. When the heating plate is not cleaned thoroughly multiple times, or if there is a stubborn layer of residue at the bottom, soak it in water for a period of time. Then, use a cleaning brush to wipe it clean. Exercise caution when wiping near the blades to avoid cuts;
7. When some parts are stained by the juice, wiping these parts with several drops of cooking oil before cleaning can help remove the stains more easily. Rinse the parts with clean water and wipe them dry thoroughly.
Note:
1. During operation, depending on the ingredients, the lid and lid seal ring can become stained to varying degrees, which is a normal occurrence;
2. When the blender is not used for a long time, please store it in a dry and ventilated place to prevent the motor from getting wet and affecting its future use.
Does it help?
Yes
No