What are the dimensions of the water inlet and drain hoses for the Xiaomi Tabletop Dishwasher?

The dimensions of the water inlet and drain hose for the Xiaomi Tabletop Dishwasher are as follows:
1. Water inlet hose: The inlet hose connects to the water source with a standard 1/2 inch fitting (outer diameter: 20mm, inner diameter: 12.7mm). The end connecting to the dishwasher uses a standard 3/4 inch fitting (inner diameter: 25mm). The outer diameter of the hose itself is 12.5±0.5mm, and the lowest point of the inlet hose should be approximately 50-55mm from the device’s base;
2. Drain hose: The outer diameter of the connection to the dishwasher is 20mm, and the outer diameter at the drain outlet is 21mm (inner diameter at both ends: 15mm). The drain hose is approximately 150cm long and can be cut according to actual needs;
3. Hose lengths: Both the inlet and drain hoses are 150cm in length. The inlet hose cannot be cut or extended, but if special installation conditions require it, a qualified extension hose can be purchased;
4. Drainage height: The drain hose will function properly even if the outlet end is installed at a higher position, as long as the height does not exceed 60cm.