What are the installation requirements for the Xiaomi Tabletop Dishwasher?

Question

Accepted Answer

The installation requirements for the Xiaomi Tabletop Dishwasher are as follows:
Product standardHong Kong version(UK standard)Taiwan version(Taiwan standard)ModelQMDW0503MQMDW0504MInstallation requirements1. The dishwasher should be installed close to a sewer and a tap water source and plugged into a 3-prong reliably grounded socket with a rated current of no less than 10A;2. The inlet water pressure should be from 0.04MPa to 0.4MPa and the inlet water temperature should not be higher than 40°C;3. Make sure the dishwasher can be installed horizontally;4. Avoid the vent on the upper left side of the dishwasher from directly facing devices such as sockets. This is because the vent can emit high-temperature, high-humidity steam.1. The dishwasher should be installed close to a sewer and a tap water source and plugged into a 3-prong reliably grounded socket with a rated current of no less than 15A;2. The inlet water pressure should be from 0.04MPa to 0.4MPa and the inlet water temperature should not be higher than 40°C;3. Make sure the dishwasher can be installed horizontally;4. Avoid the vent on the upper left side of the dishwasher from directly facing devices such as sockets. This is because the vent can emit high-temperature, high-humidity steam.
Note:1. If a special faucet is used, the specified adaptable connector will be required. The tap faucets with mismatched thread sizes cannot be installed, and you need to replace them with adaptable ones;2. The following tap faucets cannot be matched or installed: Shower faucet, Square or special-shaped water outlet, Oval water outlet, Water outlet larger than 24mm, Faucet with a height less than 15mm, Faucet with a pull-out water outlet, and All automatic sensor faucets and electric heater faucets.

Product standard	Hong Kong version (UK standard)	Taiwan version (Taiwan standard)
Model	QMDW0503M	QMDW0504M
Installation requirements	1. The dishwasher should be installed close to a sewer and a tap water source and plugged into a 3-prong reliably grounded socket with a rated current of no less than 10A; 2. The inlet water pressure should be from 0.04MPa to 0.4MPa and the inlet water temperature should not be higher than 40°C; 3. Make sure the dishwasher can be installed horizontally; 4. Avoid the vent on the upper left side of the dishwasher from directly facing devices such as sockets. This is because the vent can emit high-temperature, high-humidity steam.	1. The dishwasher should be installed close to a sewer and a tap water source and plugged into a 3-prong reliably grounded socket with a rated current of no less than 15A; 2. The inlet water pressure should be from 0.04MPa to 0.4MPa and the inlet water temperature should not be higher than 40°C; 3. Make sure the dishwasher can be installed horizontally; 4. Avoid the vent on the upper left side of the dishwasher from directly facing devices such as sockets. This is because the vent can emit high-temperature, high-humidity steam.