How to determine that a rice cooker is overflowing when cooking rice or porridge?
There are two types of rice cooker overflow:
Please check whether the issue is caused by the operation of the rice cooker:
1. Improper operation, failure to cook according to the product capacity, excessive cooking of rice or porridge, and overflow at high temperature;
2. Using the wrong cooking gear to cook porridge or rice gruel causes overflow;
3. When cooking bean ingredients that produce a lot of foam, a large number of bubbles will be generated during cooking due to the special characteristics of the ingredients, and the bubbles will overflow from the exhaust port.
Note:
These above are not the product problem, please use it as the user manual.
Please check whether the issue is caused by the product problems:
The inner pot or upper/lower sensor of the rice cooker is deformed, resulting in inaccurate temperature control and overflow. Replace the deformed device. Please check whether the surface of the product sensor housing is deformed. Please check whether the mouth and bottom of the inner pot of the product are deformed. A deformed inner pot will get stuck when installed in the product.
Please check whether the issue is caused by the operation of the rice cooker:
1. Improper operation, failure to cook according to the product capacity, excessive cooking of rice or porridge, and overflow at high temperature;
2. Using the wrong cooking gear to cook porridge or rice gruel causes overflow;
3. When cooking bean ingredients that produce a lot of foam, a large number of bubbles will be generated during cooking due to the special characteristics of the ingredients, and the bubbles will overflow from the exhaust port.
Note:
These above are not the product problem, please use it as the user manual.
Please check whether the issue is caused by the product problems:
The inner pot or upper/lower sensor of the rice cooker is deformed, resulting in inaccurate temperature control and overflow. Replace the deformed device. Please check whether the surface of the product sensor housing is deformed. Please check whether the mouth and bottom of the inner pot of the product are deformed. A deformed inner pot will get stuck when installed in the product.
Does it help?
Yes
No