How to assemble and set up the Xiaomi Electric Scooter Elite?
To assemble and set up the Xiaomi Electric Scooter Elite, please refer to the following steps:
1. Put down the kickstand, and hold up the stem until it is completely in an upright position. Then lift the quick release lever lock, and push the quick release lever inward to the end;
2. Insert the handlebar onto the stem. Make sure to install the handlebar facing the correct direction;
3. Follow the number order as illustrated to pre-tighten the screws with the included Allen key. Make sure the handlebar is correctly installed and then tighten the screws thoroughly;
4. When the scooter is fully assembled, press the power button to turn it on. Press and hold the power button for 2-3 seconds to turn it off after riding.
1. Put down the kickstand, and hold up the stem until it is completely in an upright position. Then lift the quick release lever lock, and push the quick release lever inward to the end;
2. Insert the handlebar onto the stem. Make sure to install the handlebar facing the correct direction;
3. Follow the number order as illustrated to pre-tighten the screws with the included Allen key. Make sure the handlebar is correctly installed and then tighten the screws thoroughly;
4. When the scooter is fully assembled, press the power button to turn it on. Press and hold the power button for 2-3 seconds to turn it off after riding.
Does it help?
Yes
No