To use the Xiaomi Smart Pet Fountain 2, please refer to the following steps:
1. The pet fountain is equipped with built-in batteries. It can be used when connecting or not connecting to power. Before first use, make sure to fully charge the pet fountain. Use the power cord and a power adapter with the output of 5V⎓2A to charge;
Note:
(1). The charging should be conducted indoors in a well-ventilated environment. Securely close the waterproof rubber plug of the power port after charging;
(2). Use the power cord included in the package for charging. When using a power adapter for charging, ensure that it meets the IEC 60335 safety standards or is recognized by the local regulatory authorities;
(3). Make sure that both the power adapter and the power cord are in a dry environment when charging or connecting the pet fountain to the power cord. Do not touch them with wet hands and ensure that they are not exposed to rain or any liquid.
2. Fill the water tank with water and put the drinking tray back. When adding water, do not exceed the maximum water level mark;
3. Press and hold the power button for two seconds to turn on the pet fountain;
4. Switch water dispensing modes.