What should I do if the map of the Xiaomi Robot Vacuum T12 is skewed and overlaid ?
1. Confirm that the map has been saved successfully (the regional page has partition icons and the regional functions can be used normally)
2. Turn off the power switch, restart the machine, and then manually place the machine to charge and try to restore the map. Restore failed, change the location of the charging base and re-create the map
Recommendations:
1. Place the charging base correctly against the wall (make sure to leave 0.5m left and right of the charging base and no obstacles 1.5m in front)
2. During the working process of the sweeping robot, do not move it at will or provide human help to the sweeping robot.
3. If the home environment has strong direct light, mirror reflection, etc., it will lead to chaotic construction.
Direct exposure to strong light: It is recommended to draw the curtains or change the time to take pictures.
Specular reflection: It is recommended to cover the bottom 15 cm 4. You can reset it in the map function, and the map will be rebuilt during the next cleaning process.
5. Regularly check whether there is dirt on the side of the navigation scanning component and wipe it with a clean rag or paper towel.
2. Turn off the power switch, restart the machine, and then manually place the machine to charge and try to restore the map. Restore failed, change the location of the charging base and re-create the map
Recommendations:
1. Place the charging base correctly against the wall (make sure to leave 0.5m left and right of the charging base and no obstacles 1.5m in front)
2. During the working process of the sweeping robot, do not move it at will or provide human help to the sweeping robot.
3. If the home environment has strong direct light, mirror reflection, etc., it will lead to chaotic construction.
Direct exposure to strong light: It is recommended to draw the curtains or change the time to take pictures.
Specular reflection: It is recommended to cover the bottom 15 cm 4. You can reset it in the map function, and the map will be rebuilt during the next cleaning process.
5. Regularly check whether there is dirt on the side of the navigation scanning component and wipe it with a clean rag or paper towel.
Does it help?
Yes
No